NDW-300H metal flexible shaft torsion testing machine

On site semi-finished products in the workshop (torsional performance of flexible shafts) are mainly used for testing the torsional performance of materials, as well as conducting torsional resistance tests on components and parts.

On site semi-finished products in the workshop (torsional performance of flexible shafts)

This device is mainly used for testing the torsional performance of materials, and can also be used for conducting torsional tests on components and parts. (such as various shapes of rods, bolts, torsion springs, mainsprings, aviation plugs, temperature sensors, oil pressure switches, thermal switch connection plugs, etc.) or non-metallic materials for torsional strength testing; It is also possible to conduct torsional strength tests on composite materials and components. Complies with the requirements of GB/T10128-2007 "Test Method for Room Temperature Torsion of Materials" standard. It is an essential testing instrument for quality inspection units, universities, research institutes, and industrial and mining enterprises.
This machine is controlled by a computer, and the transmission system is controlled by a transmission loading servo system. It uses high-precision torque sensors with high measurement accuracy and good stability; The computer automatically displays test data such as torque, torque coefficient, torsion angle, loading rate, and peak test torque (maximum and minimum), displaying test torsion angle torque, torque time, and torsion angle time curves; Store and print test reports. (Able to calculate ultimate torque, effective torque, torque coefficient, torsion angle, etc.) Complies with international standards such as GB, DIN, ISO, JIS, ASTM, and foreign standards.

model	NDW-500H
Accuracy level of testing machine	Level 1
MAXIMUM TORQUE	500（N·M）
Twisting speed	0.01-1000°/min
Relative error in torque measurement	± 1% (actual achievement of ± 0.5% or more)
Relative error in torsion and angle measurement	± 1% (actual achievement of ± 0.5% or more)
Relative error of angular velocity:	± 1% (actual achievement of ± 0.5% or more)
Measurement range of torsion angle	0-100000°
Maximum spacing between clamps	600mm (can be customized according to customer requirements)
Clamping diameter (mm)	Φ 6- Φ 15 (can also be customized according to user requirements)
Clamping fixture (mm)	Customize according to user samples
Overall dimensions of the host (mm)	Approximately 1200 × 500 × 1100