Multi parameter on-site water quality tester

Multi parameter on-site water quality tester W-HX

1、 Main technical parameters

(II)Product Overview:

This instrument is a field rapid testing instrument without national standards. Its main requirements are to comply with the HJ659-2013 national environmental protection standard and refer to the SY/T5329-2022 "Technical Requirements and Analysis Methods for Water Quality Indicators of Clastic Rock Reservoir Water Injection" standard. It can measure indicators such as total iron, ferrous, sulfide, dissolved oxygen, etc. in oilfield water injection quality.

★ Sensor three primary color wavelength range: red: 580-800nm; green: 500-610nm; blue: 400-510 nm

★ Working curve: The instrument is built-in and does not require calibration with a standard solution during use.

The measurement method is accurate and the measurement results are legitimate.

★ Adopting ergonomic design, it is compact and portable, easy to operate, simple to measure, and accurate in results. The precise surface packaging circuit ensures that the compact body has multiple practical functions, and the built-in lithium battery meets the measurement needs of various places such as laboratories and sites.

★ Adopting a multi wavelength high-precision optical system to meet the needs of various chemical indicators. Large measurement range and high accuracy.

★ Large screen Chinese character menu, intuitive reading, easy operation, simple to use, no need for training.

Each test tube is independently vacuum packed, which not only achieves automatic quantitative sampling, but also extends the shelf life of the product, avoiding waste caused by incomplete use of reagents after unpacking, and effectively reducing testing costs.

★ No need to use standard samples, the product has a small amount of reagents, does not come into direct contact with the human body, can be recycled after testing, and will not cause secondary pollution.

★ Large capacity storage can store tens of thousands of measurement results, with historical data browsing and output functions. Supports 232, USB, Bluetooth data interfaces, and can upload measurement results.

★ Working environment: -10-50 ° C, relative humidity 90% RH, no condensation. Suitable for indoor stable state and motion states such as vehicle, ship, buoy, etc

The instrument can measure various types of surface water, groundwater, domestic water, production water, agricultural irrigation water, aquaculture water, as well as various types of wastewater that are difficult to measure with other instruments from chemical, printing and dyeing, rubber, pesticide, pharmaceutical, brewing and other enterprises

(3)Testing tubetechnical indicators：

It can measure indicators such as total iron, ferrous, sulfide, and dissolved oxygen in the water quality of oilfield injection.