Mining hydraulic cable hot repair machine

1Mining hydraulic cable hot repair machineProduct Introduction

1. This machineCable hot repair machineUsed in the hot repair work of rubber sheathed cables, it is suitable for repairing and marking cables in coal mines, iron mines, drilling and well construction.

This machine is made of alloy aluminum box and mold, with hydraulic clamping for temperature indication, automatic temperature control prompt, labor-saving, energy-saving, reliable operation, high work efficiency, easy maintenance, and can ensure repair quality.

The repaired cable has a smooth, flat appearance, firm adhesion, and pressure resistant sealing.

2. The hot repair machine consists of a bracket, electrical system, hydraulic system, and instrument control panel. The hydraulic system mainly consists of hydraulic cylinders, pistons, valves, and pressure rods, which are used to complete the pressure required for mold lifting, pressurization, heating, and adhesive repair processes; The bracket is the main component of the hot repair machine, composed of welded steel sections, and equipped with a walking mechanism, toolbox, and counterweight iron to form a complete unified machine. It is easy to move during operation, and the electrical heating system is assembled separately and controlled uniformly. It is equipped with temperature, timing, lighting, and bell indicator devices to form good adjustment and control performance.

Secondly:Mining hydraulic cable hot repair machineProduct Description

1. Use a screwdriver to adjust the mechanical zero point of the temperature indicator to the ambient temperature scale, and adjust the constant temperature indicator pin to the temperature scale required by the rubber patch basketball team.

2. Adjust the timer switch. The timer switch is equipped with "ON" on, "OFF" off, and a time scale. Do not use a timer. Turn the switch knob to the "ON" position. To use a timer, turn the switch knob clockwise to the desired position, and then return to the time scale you have selected.

3. If you need an electric bell prompt, turn the knob to the on position. If you don't need an electric bell prompt, turn it to the off position.

4. Rotate the power switch, the electrical heating system starts to heat up, and the green light is on at this time; When the temperature reaches the desired level, the instrument relay opens, causing the AC contactor to cut off the power supply to the heating system, and then the timer switch also opens. At this time, the red light is on and the electric bell rings. The staff should promptly turn off the electric bell switch.

3： Product parameters:

Working voltage: 220V

Closing pressure: 5T

Repair length: 400-1200mm

Heating power: 4kw

Mold heating: adjustable from 0-300 ℃

Repair cable diameter:; 4-240mm

Timed time: 0-170 minutes

Working face height: 750mm

Dimensions: 1000 × 450 × 1000mm