Low temperature co fired ceramic casting machine LTCC

KEKO(Large)Casting machineCAM-H series

CAM-H series casting machine

CAM-H type tape casting machine for KEKO companyThe casting machine for product application. The advanced drying system design makes this equipment very suitable for thick film products. There are numerous temperature and air flow sensors installed for process control. Use a high-precision thickness measurement system of ± 10um to continuously monitor the thickness of the casting. The fully automatic casting gap control can automatically perform zero position calibration operation. The casting process is displayed on a touch screen or an external computer. The preset menu system can quickly initiate new casting operations.

A series of options tailored to different customer needs, including but not limited to:

Ceramic strip edge cutting system

Gundam3 different drying zones

reachableA 20 meter drying zone can achieve 2-meter step temperature control

Data link for process monitoring

Laser film thickness measurement system capable of marking

Slurry filtration tank

Equipment features:
Applicable to5~500um 厚度浆料流延

Suitable for solvent based or water-based slurries

Automatically track the position of ceramic carrier tape

Advanced drying system

High precision and stable film thickness control

Buffer the slurry before feeding it to the casting knife

Advanced slurry tank with differential level control

Advanced high-precision casting thickness control

Equipment technical parameters:

Casting speed:Adjustable from 0.1 to 6m/min

Carrier width:250mm, 450mm, or 600mm depending on the specific equipment model

Casting width:200mm or 380mm or 500mm