Light incubator*

The illumination incubator is fully automatic controlled by a microcomputer, with a touch switch for easy operation; Programmable multi-stage control mode, temperature, humidity, light intensity, and time can be set separately during both day and night. Air duct ventilation, with soft air velocity and uniform temperature in the working room; Hollow reflective tempered laminated glass, with good insulation performance and beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.

Instructions for using a 150L light incubator:

1. Please refer to the manual of the intelligent digital temperature controller for temperature control settings.

2. Connect the power supply, turn on the power switch, and the whole machine will be powered on. The power indicator light inside the switch will light up.

3. This type of incubator has breakpoint protection function and a delay function of about one and a half minutes. It takes about one and a half minutes to restart after the compressor is stopped.

4. If lighting is required, turn on the lighting switch.

Common faults:

1. Startup can easily shorten its lifespan.

2. Under balanced mode operation, the compressor is always in working condition, and the cooling effect is relatively good and the compressor can be effectively maintained.

3. It is possible that the emissions are too dense or the circulating fan inside the box is not working

4. If exposed to long light for a long time, the light bulb is prone to overheating and can cause uneven temperature

5. Uneven temperature

6. If it is a single standard operation, it will only work when the temperature drops to a certain value, and opening and closing doors will cause significant temperature fluctuations. Causing the compressor to be ordinary

7. The compressor does not cool, the temperature inside the incubator is uneven, or the circulation air outlet freezes, etc