LP R 14-10-2/90° Contour measuring needle 9056245

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rapid measurement axis of the Mal profilometer with full CNC function in the Z-axis and high-speed X-axis can achieve a maximum Z-axis positioning speed of 50 mm/s and a maximum X-axis positioning speed of 200 mm/s. This means that the MarSurf instrument can reach any measurement starting point very quickly.

Product Details

LP R 14-10-2/90 ° profilometer measuring needle 9056245

Probe arm LP R 14-10-2/90°

Order No. 9056245

Spare needle: order no. 6852302

Entire length up to turning point : 100 mm

Length up to probe mount: 73 mm

Stylus length below the probe arm : 10 mm

Measuring range: 13 mm

Tastspitzenradius / Material: 2 µm / Diamant

Probe tip radius / material: 2 µm / diamond

Opening angle of the probe tip: 90°

Can be used for:

Bores ø 14 mm up to measuring depth 7 mm

Probe needle was in the basic delivery scaope of drive unit LD 120

Probe arm LP R 14-10-2/90 °

Order number 9056245

Spare needle: Order number 6852302

Total length to turning point: 100mm

Length of probe installation location: 73 millimeters

Pin length below probe arm: 10 millimeters

Measurement range: 13 millimeters

Sharp radius/material: 2 µ m/diamond

Probe tip radius/material: 2 microns/diamond

Opening angle of probe tip: 90 °

Can be used for:

Aperture 14 millimeters, maximum measurement depth 7 millimeters

The probe is within the basic delivery range of the driving unit LD 120.