L-1 spray method test equipment

L-1 spray method test equipment(Handheld sprinkler; Handheld sprinkler) Structure principle and technical indicators

This waterproof and splash proof handheld test device (water spray nozzle IPX3 \ \ splash proof nozzle IPX4) is made of all stainless steel precision welding, and the spray hole is laser drilled. The cavity is smooth and free of burrs, and there is a baffle (SUS304) in front of the nozzle. The adjustable nozzle can spray raindrops from different angles during water testing, and the baffle can be removed.

L-1 spray method test equipment(Handheld sprinkler; Handheld sprinkler) Workflow:

1. The nozzle aperture is 0.5mm,

2. There are 121 holes, one of which has a total of 12 holes in the inner two circles with a spacing of 30 º, and 24 holes in the outer four circles with a spacing of 15 º,

3. The diameter of the showerhead is 100mm,

4. Diameter of 15mm,

5. Adjustable elevation angle

6. Spray flow rate: 10 × (1 ± 5%) L/min,

Single nozzle price: 6000 yuan, delivery upon payment

schematic diagram

JL-2 water spray test device (hose nozzle, IPX5 \ \ 6)

This anti spray test equipment (spray method (hose method) test dropper) is suitable for products that may be affected by various types of flushing or violent waves. This device uses two different sizes of nozzles, ø 6.3mm and ø 12.5mm. The water output rates of the two calibers are 12.5L/min and 100 ± 5L/min, respectively.

1. Inner diameter of nozzle: 6.3mm (IPX5)

Water flow rate: 12.5L/min;

2. Inner diameter of nozzle: 12.5mm (IPX6)

Water flow rate: 100L/min;

Spray nozzle price: 4000 yuan, delivery upon payment

Equipment structure

Equipped with a pressure water pump, high-precision flow meter, relief valve, and shock resistant pressure gauge to control flow and pressure respectively.

The flushing nozzle is made of SUS304 stainless steel, and there is a special bracket next to the box for fixing the nozzle, which can adjust the height and angle.

The equipment is equipped with a 400 liter (or 1200 liter, ø 12.5mm nozzle) stainless steel water tank, and the control system and water pump are installed in the right control cabinet for convenient and practical use.

Sample rack: adjustable speed from 1 to 4 revolutions per minute, with a load-bearing capacity of 150KG (optional)

control system

1. The equipment uses a power supply of 380V, three-phase five wire system, with phase loss protection and overcurrent protection;

3. High quality products are selected for flow meters, pressure gauges, etc;

4. Free time setting control;

5. Import execution components;

6. Non fuse protection switch; Water shortage, overload, leakage, fully sheathed terminal block, with protection such as automatic shutdown;

Equipment usage conditions

Requirements for laboratory facility layout

The occupied space is 3000mm deep and 4000mm wide, with complete lighting, power supply, water supply, and drainage facilities, and independent rooms;

The laboratory floor should be paved with anti slip and waterproof materials, and there should be a 200mm wide and 100mm deep drainage ditch around the floor to facilitate the discharge of wastewater during testing. The wastewater can be smoothly discharged outdoors through the drainage ditch to ensure that there is no accumulated water on the laboratory floor,

The surrounding walls of the laboratory should be covered with impermeable ceramic tiles or glass partitions, with a minimum height of 2000mm,

Install independent waterproof and leakage proof power supply devices in suitable locations on the wall (near the outside of the rain test room).

Temperature range: 5-35 ℃; Relative humidity: ≤ 85%;

Power requirements: AC 380 (± 10%) V/50HZ, three-phase five wire system, pre installed capacity: approximately 3.0 KW, equipment power cord 3 meters;

Water source: municipal tap water;

Price and Delivery Instructions

The supplier shall deliver the goods to the doorstep and be responsible for the shipping cost. The goods shall be shipped within 50 working days after the prepayment is received;

Price: 18000 yuan (or 26000 yuan, excluding nozzle price; complete set of 56000 yuan, including touch screen automatic control cabinet; including 13% value-added tax, packaging, transportation, installation and commissioning fees; turntable 10000 yuan optional). The purchaser shall prepay 50% of the total amount, and the remaining balance shall be paid in full after the goods are received and accepted;

The supplier is responsible for introducing installation and debugging operations until the purchaser's employees operate independently;

The warranty period is one year, starting from the date of installation and acceptance. The supplier promises to provide spare parts for life. If after-sales service must be provided on-site, the supplier shall arrive at the user's site within 48 hours.

Configuration List