Koda Heat Treatment Furnace XL-2 Box High Temperature Furnace

Box type high-temperature furnace is an experimental heating equipment. Used as a small tool for thermal processing or treatment in the cement and building materials industries. Used in the pharmaceutical industry for drug testing and pre-treatment of medical supplies. Used for sample analysis and processing in the fields of water quality, petroleum, environment, etc. in the analytical chemistry industry. Used in the coal industry for measuring moisture, ash content, volatile matter, ash melting point, ash composition analysis, and elemental analysis.

Koda Heat Treatment Furnace XL-2 Box High Temperature Furnacecharacteristic

The furnace door design of * * ensures safe and easy opening operation, ensuring that high-temperature hot gases inside the furnace do not leak out.

2. Microcomputer PID controller, easy to operate, temperature control, reliable, and safe.

3. Corrosion resistant lightweight furnace ensures durability. (Choose between refractory brick furnace or ceramic fiber furnace).

The door seal of * * reduces heat loss and increases the uniformity of temperature inside the furnace.

5. Programmable controller, 30 segment program, each segment can be set to heat up or stay, and provide programmed temperature, time, and heating power cycles. The programmable box type electric furnace has this function.

6. Multi segment programmable control can simplify complex experimental processes and truly achieve automatic control and operation.

7. The inner pot of the furnace door and the panel of the box are made of stainless steel material, which has the characteristics of corrosion resistance, high temperature deformation resistance, etc.

Technical specifications

● Model:Koda Heat Treatment Furnace XL-2 Box High Temperature Furnace

Working temperature: 0-1000 ℃

Rated power: 4kW

Furnace size (mm): 325 × 200 × 125

● Dimensions (mm): 560 × 640 × 760

● Whole machine weight: 68kg

Instructions for using the box type high-temperature furnace

1. Electric furnaces do not require special installation, they only need to be placed on a flat ground or rack. The controller should avoid vibration and should not be placed too close to the electric furnace to prevent overheating and prevent electronic components from working properly.

2. Insert the thermocouple into the temperature measuring hole behind the furnace, and fill the gap between the hole and the thermocouple with asbestos rope. When connecting the thermocouple and the controller, be careful not to connect the positive and negative poles in reverse.

3. Open the controller casing and connect the power cord, electric furnace wire, and thermocouple wire according to the standard. An additional power switch needs to be installed at the power cord entry point to control the main power supply. Due to the fact that the power supply wire on the controller shares the neutral wire system with the electric furnace wire. The phase line and the neutral line cannot be reversed, otherwise the controller cannot work properly. For safety reasons, both the electric furnace and the controller must be grounded.

4. For instrument operation, please refer to the instrument user manual.