KEM KEM flow meter, Weite Rui, good spot price

KEM KEM flow meter, Weite Rui, good spot price

KEM Twin Screw Flow Meter (SRZ High Resolution Type)

The high-resolution twin-screw flowmeter series is mainly used for high viscosity, high wear, high filling, lubricating and non lubricating media. The ultra-high resolution electronic components integrated into the measuring equipment support the measurement of small doses in applications with high reproducibility requirements.

The SRZ high-resolution series twin-screw flowmeter is suitable for precise volumetric flow measurement of various media. These include adhesives, sealants, polymers, and various oils and fats.

Technical data
Measurement range: 0.04~40 liters/minute
Measurement accuracy: ± 0.1%
Repeatability: ± 0.05% (under the same conditions)
Linearity: up to ± 0.25% of actual flow rate
Material
Shell: Complies with DIN 1.4305 [AISI 303], 1.4980 [AISI 660]
Spiral: Complies with DIN 1.4122
Bearing: Tungsten Carbide
Sealing components: FKM, PTFE (polytetrafluoroethylene) (others can be consulted)
Pressure: up to 250 bar (3600 psi)
Medium temperature: -4 ° F to+158 ° F [-20 ° C to+70 ° C] (other options available for consultation)
Pickup and amplifier
High resolution frequency output, push-pull type
Compact, integrated into the casing
Flow display instrument products

KEM flowmeter field:

1. Automotive field: Brake system testing bench: Fuel consumption measurement; Polyurethane foam for interior parts; Spray coating system; Steering system; Engine oil, brake fluid; Engine oil, brake fluid; Adhesive bonding of windshield, headlights, engine casing, etc.

2. Hydraulic field: volume and flow measurement, leakage and rupture monitoring. Measurement of hydraulic cylinder speed and position.

3. In the field of coatings: spraying systems, quantitative injection, volume. Flow rate and consumption, proportional mixed monitoring.

4. Plastic field: mixing ratio of single component and multi-component fluids, pouring and quantitative systems.

5. Measurement of consumption, such as measuring epoxy adhesives and fillers for transformers, inductors, relays, capacitors, armatures, starters, etc.

KEM KEMGear flow meter

Used for measuring paints, alcohols and chemical reagents, wax coatings, adhesives PVC、 Mixing agents, etc.... Measurement range 0.005... 1000 l/min, viscosity 5... 25000mm2/s, linear measurement value ± 0.5%

The pressure is 630 bar and the temperature is+180 ℃ (special orders are required for temperatures higher than this).

TGM thermal mass gas flowmeter

Suitable for measuring pure non corrosive gases and mixed gases, with a measurement range of 0.1... 150Kg/h, linear measurement value of ± 2.0%, pressure of 10 bar, temperature of -30...+70 ℃, signal output of 0/4... 20mA, pulse.

KEM KEMMicro flowmeter

Principle: Double ring piston flowmeter

Used for measuring additives, pharmaceuticals, aromatic hydrocarbons/fragrances, liquefied gases, softened water, liquid foods, two or three component media, etc.

Measurement range 0.005... 0.25 l/min, viscosity 0.6... 6mm2/s, linear measurement value ± 2.5%, maximum pressure 100 bar, maximum temperature+180 ℃.

Fork switch FTL20

Environmental temperature: -40...+70 ℃, medium temperature: -40...+100 ℃, operating pressure: -1...+40 bar, storage temperature: -40...+80 ℃, protection level: IP65; With M12 × 1 connector: IP67, medium density: less than 0.75 g/cm3, medium viscosity: greater than 10000 mm2/s (cSt), connection method: G1/2 'or G3/4', AC output type, power supply voltage: 19... 253VAC 50/60Hz, load: 250mA

KEM KEM flow meter, Weite Rui, good spot price