-
E-mail
2732299658@qq.com
-
Phone
18058412196
-
Address
J, No. 912 Yecheng Road, Jiading Industrial Zone, Shanghai
Product Categories
Shanghai Chuanhong Experimental Instrument Co., Ltd
Jet liquid-liquid extractor with 3/4/6 positions available for selection
NegotiableUpdate on 01/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Jet type liquid-liquid extraction instrument with 3/4/6 positions can be used for pre-treatment of liquid-liquid extraction of oil, volatile phenols, anions and other items in laboratory water quality testing. The liquid-liquid extraction device meets the extraction requirements of different samples, replacing manual extraction in liquid-liquid extraction, optimizing the instrument for liquid-liquid extraction, and replacing manual shaking to protect the safety of operators
Product Details
Jet liquid-liquid extractor with 3/4/6 positions available for selectionMain features:
1. The liquid-liquid extraction device is available in 3/4/6 different specifications and can be customized according to requirements
2. Supports the use of multiple specifications of extraction bottles (250/500/1000ml),
3. High degree of extraction, simultaneous extraction and gas release, improving the work efficiency of experimental personnel
4. The extraction time can be adjusted freely, and the airflow size can be adjusted according to requirements
5. High extraction rate ≥ 95%.
6. Suitable for liquid-liquid extraction work
7. Wide sampling range: 0-1000 milliliters.
8. Fast extraction speed, able to extract multiple samples simultaneously in 2-3 minutes
9. Each route works independently, without any collusion or interference with each other
10. Optional upgrade of fully automatic liquid-liquid extractor, automatic cleaning, automatic sampling (optional)
Jet liquid-liquid extractor with 3/4/6 positions available for selectionTechnical Specifications:
model |
CHCQ-3D |
Extraction bottle capacity |
500ML * 3 (optional other) |
display mode |
7-inch LCD touch screen |
displacement |
3*2L |
power |
50W |
air pump |
3 units |
voltage |
220V50HZ |
Overall dimensions |
500mmx200mmx600mm |
Precautions
Liquid liquid extractor is a commonly used laboratory equipment for separating and extracting target compounds from samples. When using a liquid-liquid extractor, attention should be paid to the following aspects to ensure the safety of operation and the accuracy of experimental results:
1. Familiar with instrument operation and safety regulations
Before using the liquid-liquid extraction instrument, carefully read the instrument's user manual to understand the operating methods, precautions, and safety regulations of the equipment. This includes understanding the basic structure, functional characteristics, and correct operating steps of the instrument. In addition, it is necessary to understand the properties of the solvents used, including their chemical, physical, and toxic properties, in order to use them correctly and identify potential hazards.
2. Install and debug instruments correctly
Install the instrument correctly according to the instructions, ensuring that all components are tightly and securely connected. Before use, debug and check whether the mixing, oscillation and other functions are normal. This is to ensure that the instrument can operate normally and avoid equipment damage or experimental failure caused by improper installation.
3. Pay attention to personal protection and laboratory safety
When performing liquid-liquid extraction, appropriate personal protective equipment such as gloves, glasses, and laboratory coats should always be worn. These devices can protect the skin and eyes from solvent damage. At the same time, ensure good ventilation in the operating area of the laboratory to avoid the accumulation of solvent gases that may cause suffocation or other health problems. If organic solvents are used, ensure that there is an appropriate ventilation system or exhaust hood in the laboratory.
4. Avoid cross contamination and handle waste liquids correctly
Clean the instrument after each use, especially the parts that come into contact with the sample and solvent. When extracting different samples, new extraction containers and pipelines should be replaced to prevent cross contamination. After liquid-liquid extraction, the waste liquid should be stored and treated properly. Do not dump waste liquids indiscriminately to avoid harm to the environment and human health.
1. Familiar with instrument operation and safety regulations
Before using the liquid-liquid extraction instrument, carefully read the instrument's user manual to understand the operating methods, precautions, and safety regulations of the equipment. This includes understanding the basic structure, functional characteristics, and correct operating steps of the instrument. In addition, it is necessary to understand the properties of the solvents used, including their chemical, physical, and toxic properties, in order to use them correctly and identify potential hazards.
2. Install and debug instruments correctly
Install the instrument correctly according to the instructions, ensuring that all components are tightly and securely connected. Before use, debug and check whether the mixing, oscillation and other functions are normal. This is to ensure that the instrument can operate normally and avoid equipment damage or experimental failure caused by improper installation.
3. Pay attention to personal protection and laboratory safety
When performing liquid-liquid extraction, appropriate personal protective equipment such as gloves, glasses, and laboratory coats should always be worn. These devices can protect the skin and eyes from solvent damage. At the same time, ensure good ventilation in the operating area of the laboratory to avoid the accumulation of solvent gases that may cause suffocation or other health problems. If organic solvents are used, ensure that there is an appropriate ventilation system or exhaust hood in the laboratory.
4. Avoid cross contamination and handle waste liquids correctly
Clean the instrument after each use, especially the parts that come into contact with the sample and solvent. When extracting different samples, new extraction containers and pipelines should be replaced to prevent cross contamination. After liquid-liquid extraction, the waste liquid should be stored and treated properly. Do not dump waste liquids indiscriminately to avoid harm to the environment and human health.
Similar Product Recommend
