Japanese FT Vickers hardness tester

Japanese FT Vickers hardness tester

1Technical Specifications:

Test load: Kgf: 1, 2, 3, 5, 10, 20, 30, 50
Loading mechanism: automatic loading and unloading
Loading speed: 60m/sec
Pressure holding time: 5~99 seconds
Diamond indenter: Standard Vickers indenter (HV) optional accessory, Knoop indenter (HV)/Install two indenters (HV+HK) simultaneously on the same tower.
Objective lens: Standard: TYPE A: X10/TYPE B: X10&X20
Optional accessories: up to 4 environments (add 2 more in addition to 10x and 20x lenses)

Maximum measurement length: 800 microns at 100 times/400 microns at 200 times
Minimum division: 0.1 micrometers (100-200 times)/0.01 micrometers (above 400 times)
Minimum measurement unit: 0.1 micron (100-200 times)/0.01 micron (over 400 times)
Allowable sample height: 210 millimeters
Allowable sample depth: 165 millimeters
Testeable parameters: HV/HK/HBS/HBW/Kc
Operation panel: Start/Reset/Load holding time/Light enhancement weakening/Test load/Scale conversion/Tower rotation (automatic tower rotation)/Data clearing
Fault self diagnosis: display motor and button faults
Optical function: interchangeable: aperture light bar/field of view light bar/color filter
Accuracy: Complies with JIS B-7734/B-725, ASTM E-384, and ISO/DIS 6507-2
Dimensions: Width 195 x Depth 517 x Height 690 millimeters
Weight: Approximately 55 kilograms (including standard accessories)

IIIJapanese FT hardness tester, Vickers hardness testerKey Features:

Clear touch screen with high integration PC board:
Clearly display all operational steps, measurement conditions, and measurement data.

Brinell hardness test:
As a standard feature, small load accurate Brinell hardness testing.
Just add the option 'Steel ball indenter with a diameter of 1-5 millimeters'.

Fracture toughness determination Kc:
Kc value determination in accordance with JIS R1607/IF method as a standard function
Along with Vickers and/or Knoop, this method is highly effective in determining the quality of new materials.

Clear observation and simple measurement:
The replaceable aperture light bar and field of view light bar with a new light source mechanism can provide higher resolution at both high and low magnification levels.
Easy to replace color filters provide higher resolution.

Fine and clear measurement lines:
The measurement line designed by Zuixin with a width of 0.04 millimeters provides clear and accurate measurements.

4 objective lenses:
The new tower mechanism can expand the observation range of the specimen to four objective lenses.

By rotating the objective lens, it is very easy to use different magnifications:
Choosing the appropriate objective lens can make the placement and reading of indentation more accurate and reproducible

Two indenters for Vickers/Knoop measurements:
The new tower structure can use two pressure heads. This eliminates the need to replace the indenter when measuring Vickers or Knoop hardness

Automatic turret:
Automatic turret provides a quick and easy operation sequence without the need for manual turret rotation. Manual rotation of the tower is also allowed

Japanese FT Vickers hardness testerThe information is provided by Shanghai Hengyi Precision Instrument Co., Ltd. As the general agent of FT hardness tester in China, our company would like to know more about the quotation, model, parameters and other information of FT hardness tester.

Welcome to call or leave a message for consultation: 4009011556