JPC-900L manual high-temperature hot press machine

The JPC-900L manual high-temperature hot press automatically stops after the heating is completed. If the setting is incorrect, such as not reaching the set temperature within the specified time, the device will also automatically terminate.

JPC-900L Manual high-temperature hot press machineSet up the operation interface:

firststep:Select the data screen and enter the settings interface

secondstep:selectchoose“Program control section designfixed”

thirdstep:in-apphave20Stage heating control program, select the first stage

fourthstep:According to the experimental requirements, set the temperature and heating rate for the first stage of heating

fifthstep:If multiple heating programs are required, they canto20Set up the segment program

sixthstep:After setting up, press the main interface to return to the operation interface

JPC-900L Manual high-temperature hot press machineoperationinterface：

seventhstep:On the main interface, pressdown“Heating startmove”

eighthstep:The device starts to heat up according to the program.

ninthstep:The device will automatically stop after the heating is completed. If the setting is incorrect, such as not reaching the set temperature within the specified time, the device will also automatically terminate.

Operation steps:

1. Place the sample into the mold.

2. Place the mold into the hot press machine.

3. Pre press the sample first.

4. Click on the data screen to set the heating temperature.

5. On the data screen, it is possible to setplace20Heating program with adjustable heating speed.

6. Return to the main interface and start heating.

7. When the temperature reaches the set temperature, start pressurizing.

8. Take out the sample.

Technical Specifications: