Italian SEKO metering pump

Italian SEKO metering pump

Tekba digital horizontal installation electromagnetic drive diaphragm pump

The Tekba series is a digital electromagnetic driven diaphragm pump based on microprocessor control, characterized by simple operation and stable operation. Including five sub series: EMS, EML, EMC, EMM, and EMG.

Flow range: 2.5-110 liters/hour, maximum pressure of 20 bar

Liquid contact material: PVDF (pump head), PTFE (diaphragm), EPDM or FPM (sealing ring), and ceramic (valve ball)

Typical models: Tekba: EMS600NNHP08B00, EMM600NNHP08B00

Komba seriesIt is a digital electromagnetic driven diaphragm pump based on microprocessor control, with the characteristics of simple operation and stable operation. Including 4 sub series: DMSDML.DMC and DMM.

Flow range: 1-9 liters/hour, maximum pressure 10 bar

Liquid contact material: PVDF (pump head), PTFE (diaphragm), EPDM or FPM (sealing ring), and ceramic (valve ball)

Typical models: Komba: DMS200AHP0800, DML200AHP0800

Draw & Compact

Vertical and wall mounted electromagnetic driven diaphragm pumps

Tekna and Kompact series are professional electromagnetic driven diaphragm pumps with precise dosing, multiple models and functions to choose from, and a wide range of applications

Wide, it can be used for both simple water treatment dosing and complex water treatment processes.

The main characteristics of these two pumps are precise and stable dosing, therefore, they are widely used in drinking water and wastewater treatment processes.

Techna

Vertical and wall mounted electromagnetic driven diaphragm pumps

The Tekna series is a classic product in our metering pump family that is widely used worldwide. It can be installed vertically or wall mounted. Multiple models with optional functions, automatic control using analog signal input or digital pulse signal input, can meet the requirements of any installation condition in the water treatment industry.

Flow range: 0.4-110 liters/hour, maximum pressure 20 bar

Liquid contact material: PVDF (pump head), PTFE (diaphragm), EPDM or FPM (sealing ring), and ceramic (valve ball)

Flow control methods: manual control and automatic control

Typical models: TEKNA: AKS500NHP800, AKL603NHP0800, AKS603NHP0800, AKS803NHP0800

Kompact

Compact vertical and wall mounted electromagnetic driven diaphragm pump

The Kompact series is an electromagnetic driven diaphragm pump based on microprocessor control, characterized by simple operation and stable operation. The flow rate can be manually or automatically adjusted (signal input control), and it also comes with a liquid level probe interface.

Flow range: 1-9 liters/hour, maximum pressure 10 bar

Material of liquid contact end: PVDF (pump head), PTFE (diaphragm), EPDM or FPM (sealing ring), and ceramic (valve ball) Flow control mode: manual control and automatic control

Typical models: Kompact: AMS200AHE0800, AMS201HE0800, AMM200AHE0800, AMM201AHE0800

mechanical pump

The Kosmo series is a key product for your high-precision, stable, and reliable dosing needs

The Kosmo series is a motor-driven diaphragm pump with a mechanical diaphragm liquid contact end and a mechanical reset device. Its main feature is a wide flow coverage range.

Widely applicable

The Kosmo series has a wide range of applications, covering many water treatment processes:

• Drinking water treatment (adding coagulants, coagulants, sodium hypochlorite, lime slurry, acid, alkali, *, activated carbon, etc.)

• Household or industrial wastewater treatment, boiler feedwater and cooling water

• Chemical treatment, electroplating treatment: addition of degreaser and cleaning agent, nickel plating and chemical nickel plating, copper plating, tin plating

The MM2 series runs extremely stably, making it suitable for various water treatment dosing applications. It adopts a mechanical device made of durable and sturdy materials and a cast aluminum shell, with a maximum flow rate of 2300 liters/hour and a maximum pressure of 10 bar.

Like other metering pump products in our family, the Kosmo series has been highly focused on durability, chemical compatibility, and stability since its inception. By adopting a variable eccentric structure, the PTFE diaphragm is directly connected to the mechanical moving part, allowing it to flexibly utilize the power of the motor during the suction and discharge stages. Therefore, it is very suitable for application in high suction head conditions.

The mechanical components are lubricated with oil bath, and the main moving parts are connected with bearings to avoid overheating as much as possible, reduce noise, and extend the life of the pump.

The MM1 series and MM2 series have very similar characteristics and functions, but with slightly lower flow rates, with a maximum flow rate of 530 liters/hour and a maximum pressure of 12 bar, slightly higher than the MM2 series.

Like other metering pump products in our family, the Kosmo series has been highly focused on durability, chemical compatibility, and stability since its inception. By adopting a variable eccentric structure, the PTFE diaphragm is directly connected to the mechanical moving part, allowing it to flexibly utilize the power of the motor during the suction and discharge stages. Therefore, it can even be applied in high suction head conditions.

The mechanical components are lubricated with oil bath, and the main moving parts are connected with bearings to avoid overheating as much as possible, reduce noise, and extend the life of the pump.

Typical model, MM1E140B31B20800，MM1E140C31B40800，MM2H157G31C40800，MM2H179G31D40800

Spring PS2 series plunger pump

Flow range: 40-1000 liters/hour, maximum pressure of 20 bar

Contact material: PVC, SS316L (pump head), EPDM or FPM (sealing ring), ceramic and stainless steel (plunger)

The plunger pump offers a variety of pump head materials to choose from, and the motor can be equipped with variable frequency and explosion-proof motors. The stroke length can be manually adjusted, or an electronic stroke regulator can be selected for automatic adjustment, making it widely used.

The PS2 series plunger pump features a spring reset mechanism and an aluminum casing. The flow rate can be manually adjusted through the stroke adjustment knob, or an optional electronic stroke regulator can be selected for automatic adjustment. This regulator can receive 4-20mA current signal and digital pulse signal input from the water meter.

Typical models: PS2E054C31E4080, PS2E064A31E4080, PS2E064C, 31E4080

Spring Ps1 series plunger pump

Flow range: 1.5-304 liters/hour, maximum pressure 20 bar

Contact material: PVC, SS316L (pump head), EPDM or FPM (sealing ring), ceramic and stainless steel (Dusselt)

The PS1 series has a smaller flow rate than the PS2 series and can also provide a variety of pump head materials to choose from. The motor can be equipped with variable frequency and explosion-proof motors, and the stroke length can be manually adjusted. An electronic stroke regulator can also be selected for automatic adjustment, making it suitable for use in situations with low flow rates

The PS1 series has a maximum flow rate of 304 liters per hour and a maximum pressure of 20 bar

Typical models: PS1D025A31A4080, PS1D048A31B4080, PS1D048C31B4080

Italian SEKO metering pump - Spring MS1 series mechanical diaphragm pump

Flow range: 5.5-1200 liters/hour, maximum pressure 10 bar

• Materials for the liquid contact end: PVDF, PVC, SS316L (pump head), PTFE (diaphragm), EPDM or FPM (sealing ring), and ceramic and stainless steel (valve ball)

• Provides a variety of pump head materials to choose from, and the motor can

Optional variable frequency and explosion-proof motors, stroke length can be manually adjusted, and electronic stroke adjusters can also be selected for automatic adjustment, so the application range is very wide.

Unlike plunger pumps, the MS1 series mechanical diaphragm metering pump is absolutely safe and leak free, so its application range is wider than that of plunger pumps.

The flow rate of the MS1 series mechanical diaphragm pump can be manually adjusted through the stroke adjustment knob, or an optional electronic stroke regulator can be selected for automatic adjustment. This regulator can receive 4-20mA current signal and digital pulse signal input from the water meter.

Typical model:

MS1A094C31B408，MS1B108A31C4080，MS1B108B31C4080，,MS1B108C31C4080，MS1C138A31C4080，MS1C138B31C4080，MS1C138C31C4080