Intelligent door lock durability testing device

1productPurpose:

Intelligent door lock durability testing deviceThis system is used for simulating behavior testing of electronic anti-theft locks and other products such as fingerprint door opening, key door opening, password door opening, magnetic card door opening, etc. It provides multiple testing modes for testing selection and meets the testing requirements of GB 21556-2008 General Technical Conditions for Lock Safety, JG/T 394-2012, IEC 62692 Digital Door Lock System Standard, UL294 Access Control System, UL1037, BHMA A156.25, BHMA A156.13, BHMA A156.36 and other relevant standards. An integrated lifespan testing system designed specifically for password electronic door locks, fingerprint electronic door locks, and card swiping intelligent door locks.

2、 Main compliance standards:

1) Chapter 5.11 "Durability" requirements of GA374-2001 "Electronic Anti theft Locks" standard;

2) Requirement 7.5.1.3 "Battery Capacity and Undervoltage Indication Test" in GA701-2007 "General Technical Requirements for Fingerprint Anti theft Locks" standard;

3) JG/T394-2012 "General Technical Requirements for Building Intelligent Door Locks" standard, section 6.14 "Repeated opening and closing times" test requirements.

IIIIntelligent door lock durability testing deviceIntelligent data collection system (1 set):

1. The collection system meets the standards:

1) Meet the requirements of Chapter 5.6 "Key Quantity Requirements" and Chapter 5.4 "Error Recognition Rate" in GA374-2001 "Electronic Anti theft Locks" standard;

2) Meet the requirements of Section 6.3.9 "Communication Function" and Section 6.4 "Performance" in GA701-2007 "General Technical Requirements for Fingerprint Anti theft Locks" standard;

2. Main technical parameters of the collection system:

1)2 analog input channels, with a resolution of 16 bits;

2)2-channel analog output with a resolution of 16 bits;

3)1MSps input sampling rate;

4)Basic accuracy of 0.01%;

5)2MSps output sampling rate;

6)Range ± 5V;

7)Common mode rejection ratio 90dB;

8)Input impedance 1G Ω | | 10pF;

9)12VDC power supply;

10)Rich Labview upper computer development routines;

11)Can be inserted into N8000 measurement and control host for use, or used independently;

12)NXI slot number 1.

4、 Technical features:

1. The device has a simple operation interface, making experimental operations clear at a glance. Parameter settings and adjustments can be easily controlled, making it more convenient to use;

2. It is driven by Taiwan, China stepping motor, with high-precision positioning accuracy, low noise, and can be used for a long time. The test frequency is continuously adjustable;

3. Adopting a specially designed power rectifier circuit to enhance the long-term usability and anti-interference ability of the motor and actuator components;

4. Using programmable origin reset, there is no need to manually adjust the fixture to its original position.

5. On the equipment control software, touch screen display is used for input control, and PLC is used for programming. The working conditions are displayed clearly and can be adjusted by setting corresponding parameters for each working condition, such as testing speed, testing time, delay time, etc.

6. The main components of the equipment, such as cylinders, drive motors, touch screens PLC、 Key components such as frequency converters, force sensors, and data acquisition cards should all adopt the international zm brand to improve the equipment's grade and reliability, and meet the requirements of relevant tests.

The requirements.

5Main technical parameters:

1. The experimental machine can simultaneously clamp and test 1-2 door locks;

2. The door frame is made of 100mm x 50mm x 3mm square tube and is easy to disassemble. It can be equipped with a locking plate and can be installed with 3 screws. The installation position can be adjusted up and down by 350mm. (External dimensions: length (1800mm-2300mm) X width 1320mm X height 2500mm);

3. Electronic lock testing process (hotel door lock):

① Rotate the knob to produce a square tongue ②, press the card ③, press down on the handle ④, move the simulated door to open, release the handle and move the simulated door to close

4. Fingerprint lock testing process:

① Lift the external handle to open the square tongue ②, press the safety button inside the door to open the safety tongue ③, pull the sliding cover to power on ④, press the fingerprint ⑤, press the handle ⑥, move the simulated door to open ⑦, reset the handle, and move the simulated door to close

5. Password lock testing process:

① Lift the external handle to open the square tongue ②, press the safety button inside the door to open the safety tongue ③, pull the sliding cover to power on ④, press the fingerprint ⑤, press the handle ⑥, move the simulated door to open ⑦, reset the handle, and move the simulated door to close

6. Password lock testing process:

①. Pull up the external handle to open the square tongue ②. Pull out the safety button inside the door ③. Pull the sliding cover to power on ④. Press the password ⑤. Press down the handle ⑥. Move the simulated door to open ⑦. Reset the handle and move the simulated door to close

7. Fingerprint lock (card)+password testing process (combination can be swapped):

①. Pull up the external handle to turn on the square tongue ②. Pull out the safety button inside the door to turn on the safety tongue ③. Pull the sliding cover to power on or press the fingerprint window button or multiple buttons to power on at the same time ④. Press and move the simulated door close fingerprint ⑤. Press the password ⑥. Press down the handle ⑦. Move the simulated door open ⑧. Reset the handle

8. Can achieve clockwise and counterclockwise rotation opening of the door lock, easy to adjust;

9. The angle of the handle can be adjusted freely, and it can be raised or lowered. A 0.4KW servo motor is used as the driving device;

10. The torque can be adjusted to 0-25, and the maximum torque can reach 5KN;

11. The position of the motor can be adjusted up and down, and fine tuned left and right;

12. Each workstation operates independently, equipped with one system and electronic lock function (i.e. adding knob to open square tongue function and using card or fingerprint as door opening device), and each workstation is independent of PLC and touch screen;

13. Each workstation can carry loads of 10N, 25N, 50N, and 120N (European standards) respectively, with the load position 25.4mm away from the door edge (changed to 50mm, adjustable left and right) and horizontal as the centerline of the handle. Using steel wire rope pulling method, micro adjustment can be achieved up and down;

14. The password keyboard can be set by oneself, suitable for various row and column spacings and non-standard keyboards. 12. Up to 2 sets of passwords can be set, with a maximum of 22 digits (unlimited number of digits), using cyclic testing;

15. The keyboard has the function of simultaneously pressing multiple keys to activate the lock. The password lock test can record the number of times a single button is pressed and the number of times a password group is tested;

16. It can achieve testing of optical fingerprint heads and capacitive fingerprint heads, and the pressing position of the fingerprint can be cyclically shifted (which can adapt to testing with fingerprint locks that have the function of solving residual fingerprints);

17. High precision safety protection device with shutdown protection function in case of malfunction;

18. Control and operation: PLC intelligent program+7-inch TFT true color LCD touch screen operation;

19. Equipment dimensions: (W * D * H) approximately 1500 × 850 × 1750mm;

20. Equipment electrical requirements: AC220V ± 10% 50/60Hz, power 850W&gas source 0.5-0.7MPa.