Integrated bearing vibration measuring element HDYD215

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The HDYD215 bearing vibration measuring element is integrated, and the HD-YD-215 bearing vibration measuring element integrates the vibration velocity sensor and precision measurement circuit together to form a high-precision vibration measurement system ..

Product Details

Integrated bearing vibration measuring element HDYD215

The HD-YD-215 bearing vibration measuring element integrates vibration velocity sensors and precision measurement circuits to form a high-precision vibration measurement system, realizing the function of the traditional "sensor+monitoring instrument mode vibration measurement system. The transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for vibration measurement of factory equipment such as fans, motors, water pumps, etc.

Technical Specifications
Power supply: 24VDC ± 10%
Input signal: taken from the signal of the built-in vibration speed sensor
Sensitivity: 20mv/mm/s ± 5%
Frequency response: 10-1000 Hz or 5-1000 Hz (special instructions)
Range: 0-20mm/s (true RMS)
0-200um (peak to peak)
Measurement error: ± 1% of full scale
Output current: 4-20mA
Output impedance: ≤ 500 Ω
Temperature range: -25 ℃ to+65 ℃ during operation
Storage time: -40 ℃~85 ℃
Relative humidity: up to 95%, non condensing
Dimensions: φ 33 × 75mm
Weight: Approximately 340g

Order code
XJ-9200A □□ (optional) - □□ (V/D) - A □□ - B □□ - C □□
Selection instructions
Optional: Waterproof connector □: F-Waterproof connector
Kaizhuang outgoing line □: B-Kaizhuang pipe
Required: Selection Description
Range □□:
Vibration velocity ranging from 10V-0 to 10mm/s; 20V*-0～20mm/s； 30V-0～30mm/s； ……
Vibration displacement ranging from 100D-0 to 100 μ m; 100D-0～200μm； 300D-0～300μm； ……
Installation direction A □:
1- Level; 2- Vertical; 3 * - Universal
Install thread B □:
1*-M10×1.5； 2-M8×1.25； 3- Magnetic seat; 4- Special customization
Cable length C □:
1-1m； 2*-2m； 3-3m； ……
Unless there are special circumstances, the manufacturer produces according to each item; If you have any special requirements, please consult with our company
Selection example: XJ-9200A-20V-A3-B1-C2
Bearing vibration measuring element HD-YD-215

0-1k Ω to 0-10V electronic ruler to analog transmitter

Overview:

electronrulersignaltransmitterproductMainly used for displacements or angles of 0-5K, 0-10K, etcsensorIsolation and transmission of signals (sensors need to be equipped by the user), inindustryIt is mainly used for signal isolation and transmission. The transmitter input adopts constant voltage drive and is suitable for 3-wire sensors. If it is a 2-wire sensor, it can also be customized into a constant current drive mode according to requirements. Input, output, and auxiliarypower supplyThere is isolation (triple isolation) between them, which can withstand 2500VDCIsolation and voltage resistance. The product adopts the DIN35 international standard guide rail installation method, with small size, high precision, stable performance, and high cost-effectiveness. It can be widely used in petroleum, chemical, and power industriesinstrumentation and metersandindustrial controlWaiting for the industry. This series of electronic ruler signalsIsolation amplifierVery convenient to use, just connect the wires to achieve isolated transmission of displacement signals.