Integrated HZDB6d vibration measurement sensor for water supply pump

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The water supply pump vibration measurement sensor HZDB6d is integrated, and the water supply pump vibration measurement sensor HZD-B-6d integrates the vibration velocity sensor and precision measurement circuit together to form a high-precision vibration measurement system ..

Product Details

Integrated HZDB6d vibration measurement sensor for water supply pump

The HZD-B-6D water supply pump vibration measurement sensor integrates a vibration velocity sensor and a precision measurement circuit to form a high-precision vibration measurement system, realizing the function of the traditional "sensor+monitoring instrument mode vibration measurement system. The transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for vibration measurement of factory equipment such as fans, motors, and water pumps.

Technical Specifications
Power supply: 24VDC ± 10%
Input signal: taken from the signal of the built-in vibration speed sensor
Sensitivity: 20mv/mm/s ± 5%
Frequency response: 10-1000 Hz or 5-1000 Hz (special instructions)
Range: 0-20mm/s (true RMS)
0-200um (peak to peak)
Measurement error: ± 1% of full scale
Output current: 4-20mA
Output impedance: ≤ 500 Ω
Temperature range: -25 ℃ to+65 ℃ during operation
Storage time: -40 ℃~85 ℃
Relative humidity: up to 95%, non condensing
Dimensions: φ 33 × 75mm
Weight: Approximately 340g

Order code
XJ-9200A □□ (optional) - □□ (V/D) - A □□ - B □□ - C □□
Selection instructions
Optional: Waterproof connector □: F-Waterproof connector
Kaizhuang outgoing line □: B-Kaizhuang pipe
Required: Selection Description
Range □□:
Vibration velocity ranging from 10V-0 to 10mm/s; 20V*-0～20mm/s； 30V-0～30mm/s； ……
Vibration displacement ranging from 100D-0 to 100 μ m; 100D-0～200μm； 300D-0～300μm； ……
Installation direction A □:
1- Level; 2- Vertical; 3 * - Universal
Install thread B □:
1*-M10×1.5； 2-M8×1.25； 3- Magnetic seat; 4- Special customization
Cable length C □:
1-1m； 2*-2m； 3-3m； ……
Unless there are special circumstances, the manufacturer produces according to each item; If you have any special requirements, please consult with our company
Selection example: XJ-9200A-20V-A3-B1-C2
Vibration measurement sensor HZD-B-6d for water supply pump

Introduction to BR series Roche coil transmitter

1 productOverview

Application of BR series productselectromagnetic inductionPrinciple: Real time measurement of AC high current in the power grid, using true effective value and linear compensation technology to isolate and transform it into standard DCsignalOutput.DC24V safe voltagepower supply, possessinghigh precisionIt has the characteristics of high isolation, high safety, and low power consumption, and can be widely used in metallurgy, electroplating, welding, and other fields.

2 Model Description

3 General Technical Conditions

4 Appearance and Installation

4.1 Length of Roche coils of different specifications

Note: Customization can be made according to customer needs.

4.2 BR-AIcommunicationcurrenttransmitter

5 Wiring methods

Note: The specific wiring shall be based on the wiring diagram on the physical casing.

6 Installation methods

Integrated HZDB6d vibration measurement sensor for water supply pump