- Phone
-
Address
No. 2514 Songjin Road, Zhangyan Town, Jinshan District, Shanghai
Product Categories
Shanghai Taizhu Trading Co., Ltd
Installation position of IFM Yifumen flow sensor SA4314
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The SA4314 from IFM is a flow sensor based on the principle of calorimetry, mainly used to monitor the flow of liquids (such as water and oil) and gases. Installation position of IFM Yifumen flow sensor SA4314
Product Details
Installation position of IFM Yifumen flow sensor SA4314
Yifu Gate (IFM)SA4314It is a product based onCalorimetry principleThe flow sensor is mainly used to monitor the flow of liquids (such as water, oil) and gases. One of its major features isSimultaneously equipped with flow and temperature measurement functionsAnd it comes with intuitive LED status indicators.
The following is a summary of the core information of the product:
1. Quick overview of core parameters
parameter category |
Specifications |
|---|---|
Measuring principle |
Calorimetry (heat conduction) |
Measurement object |
Liquid (water, oil, ethylene glycol)/gas (air) |
flow rate range |
液体： 0.0457 - 3 m/s (0.15 - 9.85 ft/s) |
temperature range |
Medium temperature: -20 ° C to+100 ° C |
Working Voltage |
18 - 30 V DC |
output signal |
2-channel analog output (4-20mA/0-10V, adjustable) |
display mode |
4-digit LED digital display, red/green status indicator |
Protection level |
IP65 (dustproof, waterproof) |
interface dimensions |
Probe length 200mm, pipe diameter 8mm |
2. Main functions and features
-
Dual parameter monitoringNot only can it measure flow velocity, but it can also monitor medium temperature simultaneously without the need for additional temperature sensors.
-
intuitive displayThere is a 4-digit LED display screen on the top of the device, which can directly read numerical values.redThe indicator light can quickly indicate whether the flow is within the set range (green indicates normal, red indicates abnormal).
-
Flexible installationThe process joint can rotate, making it easy to adjust the angle in a small space and achieve optimal alignment.
-
high adaptabilityOptimized for water, oil, and air, suitable for various industrial scenarios.
3. Installation and usage suggestions
-
Installation locationSuggest installing it in the pipelinelow pointorVertical segmentEnsure that the pipeline is filled with medium (full pipe state) to avoid interference from bubbles.
-
Requirements for straight pipe sectionsTo ensure measurement accuracy, there should be sufficient straight pipe sections upstream of the sensor (usually recommended for 5D in the front and 3D in the back, where D is the pipe diameter) to stabilize the flow field.
-
Attention to wiringThe device has reverse phase protection function, but it is still necessary to confirm the correct polarity of the power supply when wiring to avoid damaging the device due to reverse connection.
4. Common troubleshooting
-
No output/inaccurate dataCheck if the power cord connection is secure and confirm that the operating voltage is within the range of 18-30V DC.
-
The signal fluctuates greatlyCheck if the sensor is subjected to strong electromagnetic interference and ensure that the shielded wire is reliably grounded.
-
Display abnormalityIf all LEDs flash red, it usually indicates installation error or parameter setting failure, and installation conditions need to be checked or parameter settings need to be reset.
Installation position of IFM Yifumen flow sensor SA4314
Similar Product Recommend
