- Phone
-
Address
No. 2514 Songjin Road, Zhangyan Town, Jinshan District, Shanghai
Product Categories
Shanghai Taizhu Trading Co., Ltd
ELCO Yike Ultrasonic Sensor UKS1000-G18-LI7L-Q12
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Yike UKS1000-G18-LI7L-Q12 is an M18 threaded cylindrical ultrasonic sensor with switch output. This model is mainly used for object detection, in place detection, and liquid level monitoring within a detection range of 1000mm. ELCO Yike Ultrasonic Sensor UKS1000-G18-LI7L-Q12
Product Details
ELCO Yike Ultrasonic Sensor UKS1000-G18-LI7L-Q12
YikeUKS1000-G18-LI7L-Q12is aM18 threaded cylindrical ultrasonic sensor with switch outputThis model is mainly used for1000mm detection rangeWhether the objects inside are detected, in place detection, and liquid level monitoring.
Model Naming Analysis
UKS1000
Series and Range: UKS Series, Detection Distance 1000 mm
G18
Installation appearance: M18 metal threaded cylindrical shell
LI7L
Output type: Switching output (usually PNP normally open/normally closed can be set), 7L represents specific electrical specifications
Q12
Plug in method: M12 industrial standard connector (4-pin)
Technical Specifications
project |
specification |
|---|---|
Testing Scope |
30... 1000 mm (adjustable) |
blind spot |
0... 30 mm (unable to detect stably within the blind zone) |
Transducer frequency |
About 300 kHz |
resolution |
≤ 0.5 mm |
repeatability accuracy |
≤ 0.15% full scale |
Linearity error |
≤± 0.5% full scale |
response time |
About 50ms |
Switch delay |
Usually 20 mm (software configurable) |
elco
Electrical and interface specifications
-
Working VoltageDC 15... 30 V (standard 24 V power supply)
-
no-load current：≤ 50 mA
-
switch output：PNP switch quantity，Normally open/normally closed switchable(via demonstration line or IO Link)
-
output current≤ 200 mA (short circuit protection)
-
connection method：M12 4-pin connector(Pin definition: 1-L+, 3-l -, 4-Q switch output)
-
IO-Link：support（V1.1，COM2）， Can achieve parameter backup, remote configuration, and diagnosis
Mechanical and environmental parameters
project |
specification |
|---|---|
Exterior Material |
Metal shell (copper nickel plating), with plastic (epoxy resin/polyurethane) as the transducer surface |
Protection level |
IP67(Complete dust prevention, short-term immersion protection) |
Operating Temperature |
-25℃ … +70℃ |
Storage temperature |
-40℃ … +85℃ |
weight |
About 60 grams |
installation torque |
zui大 15 Nm |
Function and Operation
-
Detection Mode：
-
can pass throughExternal teaching lineSet switch point: single point mode (window mode) or two-point mode (reflector/background suppression mode).
-
synchronization function：
-
supportMultiple sensors synchronizedWork to avoid crosstalk between adjacent ultrasonic sensors. This can be achieved by connecting the synchronization line (Pin 2/4).
-
temperature compensationBuilt in temperature compensation algorithm to reduce the impact of environmental temperature changes on sound speed.
Typical application scenarios
-
level controlAlarm for high and low liquid level limit of water tank and oil tank.
-
Transparent object detectionFilm, glass bottle, mineral water bottle, transparent packaging box (ultrasonic waves are not affected by color and transparency).
-
Level monitoringCheck for the presence of bulk materials in the silo and hopper.
-
collision protectionObstacle detection and avoidance for AGV carts and stacker cranes.
-
Roll diameter controlFull roll and missing roll detection in the printing and packaging industry.
ELCO Yike Ultrasonic Sensor UKS1000-G18-LI7L-Q12
Similar Product Recommend
