IPX7-8 pressurized immersion test device

IPX7-8 pressurized immersion test deviceMeet the standards

The equipment meets the requirements of GB 4208-2008, GB/T 2423.38-2005, GB/T 4942.1-2006, GB 7000.1-2007, GJB150.14A-2009, etc

IPX7-8 pressurized immersion test deviceTechnical specifications

Model: JSYG-600

Inner cavity diameter: 800mm

内腔高度： 1200mm

Tank wall thickness: 4mm

Basket size: Φ 600mm × 240

Immersion depth: 1-50m (0.01~0.5MPa)

Introduction to Structural Design

Pressure sealed container: fully sealed pressure chamber structure, SUS304 stainless steel tank, top door opened by electric push rod;

The basket is made of SUS304 mesh plate and is equipped with a steel wire rope to suspend the upper edge of the tank for easy operation;

Pressure setting range: atmospheric pressure to 0.5MPa, simulating water pressure at a depth of 50 meters by pressurizing the water tank with compressed air;

Spring type safety valve

Circulation caliber: DN20

Rated pressure: 1.6Mpa

Relief pressure of safety valve: 0.55Mpa

Control system

In order to facilitate control, the equipment adopts Taiwan, China 7-inch programmable LCD touch screen controller to control pressure, time, etc., effectively ensuring that the test runs according to standards; The control system is equipped with Schneider execution components;

Operation mode: Program controlled operation, single manual operation, timed shutdown, etc

Human computer interface: Chinese interface menu, color LCD touch screen (displaying the working status of test pressure, test time, etc.)

Controller: Taiwan, China PLC, analog quantity acquisition module

Execution components: AC contactors and relays from Schneider in France;

Pressure gauge: The current value is displayed by a pressure gauge that shows the actual pressure, and a pressure sensor is connected to the controller through a 4-20mADC signal, controlled by it, and displayed.

Protection system

Overpressure protection (automatic pressure relief);

Overall equipment timing;

Protection against leakage, operation indication, automatic shutdown after fault alarm, etc.

Equipment usage conditions

Environmental temperature: 0 ℃ to+35 ℃; Environmental humidity: ≤ 85%

The ground load-bearing capacity and strong speed meet the weight of the tank, specimen, and water, and are convenient for fixing expansion screws

Power requirements: AC220 (± 10%) V/50HZ; pre installed capacity: approximately 2KW

Gas source requirements: rated pressure not less than 0.7MPa, rated displacement greater than 0.2m3/min

Water source requirements: municipal tap water and drainage floor drains;

Random data

Certificate of conformity, warranty card, circuit diagram;

Instruction manual: operating methods, precautions, basic shipping accessories, maintenance and repair matters;

Delivery Instructions

Price: 50000 yuan, including 13% value-added tax, packaging and transportation, installation and commissioning, and operation training; Excluding the price of air compressors;

The supplier is responsible for the freight and delivery to the doorstep. The goods will be shipped within 40 working days after the prepayment is received;

The purchaser shall prepay 50% of the total amount, and pay the remaining balance in full after the goods arrive and pass the acceptance inspection;

The supplier is responsible for introducing installation and debugging operations until the purchaser's employees operate independently;

The warranty period is one year, starting from the date of installation and acceptance. The supplier promises to provide spare parts for life. If after-sales service must be provided on-site, the supplier shall arrive at the user's site within 48 hours.

Main Configuration Table