IFM Yifumen pressure sensor PN7160 output mode digital quantity

IFM Yifumen pressure sensor PN7160 output mode digital quantity

ifmPN7160It is a compact structure and reliable performanceElectronic pressure sensorSpecially designed for liquid and gas media in industrial automation environments. It belongs to the IFM PN7xxx series and is available inCompact, economical, and basic functional stabilityA good balance has been achieved between them, suitable for general scenarios that require space and do not require advanced diagnosis.

Core attributes and range

Measurement type: relative pressure.

Pressure range: 0... 10.0 bar (0... 145 psi, 0... 1 MPa).

This is a standard range for medium and low pressure, widely used in pneumatic systems and low-pressure fluid control.

Overload pressure: 30 bar.

Burst pressure: ≥ 100 bar.

Applicable media: compressed air, hydraulic oil, water, non corrosive industrial liquids.

Medium temperature: -25... 80 ° C.

Environmental temperature: -25... 80 ° C.

Structure and mechanical characteristics

Shell material: stainless steel (316L)/engineering plastic combination. Compared to the all metal casing of PN7270, PN7160 reduces weight and cost while ensuring durability.

Connection thread: G 1/4 external thread (DIN EN 837 standard), compatible with mainstream industrial pneumatic joints.

Display screen: Dual color 4-digit LED display screen (red/green).

The display can be rotated 180 °, suitable for side or inverted installation.

Protection level: IP 67.

Complete dust prevention and can be immersed in water for a short period of time. Does not include IP 69K high temperature and high pressure flushing function.

Volume: The structure is shorter than the PN26xx and PN72xx series, making it suitable for installing control panels or pneumatic busbars with extremely limited space.

Electrical output and configuration

1. Output channel:

OUT1: Programmable as switch output (PNP/NPN) or analog output (4... 20 mA/0... 10 V).

OUT2: Only switch output (PNP/NPN).

2. Switching parameter:

Load current: ≤ 250 mA.

Response time: ≤ 3 ms.

Function: normally open/normally closed, window mode, hysteresis mode.

3. Analog parameter:

Accuracy: ≤± 0.5% of full scale.

Scalable: The pressure values corresponding to 4 mA and 20 mA can be freely set within the full range. 、

IO Link communication interface

PN7160 also supports IO Link 1.1 standard and has intelligent communication capability.

Communication speed: COM2 (38.4 kbps).

Process data: Provide 16 digit pressure value+switch status.

Remote accessible parameters:

Switch points SP1/rP1, SP2/rP2.

Output logic (normally open/normally closed).

The starting and ending values of analog quantities.

Display settings (damping, direction).

Diagnostic data: Record of peak pressure (maximum/minimum value since power on).

Data storage: Supports IO Link data storage function, and parameters can be automatically downloaded when replacing sensors.

Differences from PN7270:

PN7160 does not support temperature peak recording.

PN7160 does not support running time counters.

PN7160 does not support dual-mode analog output (only OUT1 can be used as analog).

core strengths

Compact size: With an extremely short shell length, it is suitable for integration into end of arm tools (EOAT) or compact pneumatic modules of robots.

High cost-effectiveness: retains IO Link intelligent communication and basic high-precision measurement, removes heavy industry grade voltage resistance and complex diagnostic functions, and has a more advantageous price.

Easy to operate: 3 buttons for quick teaching, no manual required to complete switch point settings.

Vacuum resistance: although the standard range is 0... 10 bar, its sensor structure supports negative pressure measurement (the range setting needs to be adjusted in the menu), which is compatible with some vacuum pumping applications.

IFM Yifumen pressure sensor PN7160 output mode digital quantity