HygroVUE10 digital temperature and humidity sensor

sturdy and durable

flexible and convenient

Easy to use, easy to maintain

HygroVUE10 digital temperature and humidity sensorIt is a digital sensor that integrates air temperature and relative humidity measurement. The electronic components are located inside the sensor and can provide accurate measurements. Bus systemSDI-12The communication protocol can be used to distinguish between different addresses in the same data collection system and access moreSDI-12Type digital sensor. In addition, digital output sensors have greater advantages in anti-interference over analog output sensors in long-distance cable transmission.

HygroVUE10 digital temperature and humidity sensorIt is a digital sensor that integrates air temperature and relative humidity measurement. The electronic components are located inside the sensor and can provide accurate measurements. Bus systemThe stainless steel mesh filter on the sensor minimizes the impact of dust and dirt on the sensor, while not affecting the air exchange around the sensor components, reducing the possibility of condensation water remaining inside the filter cover. There is a small adhesive on the surface of the componentPTFEFilter to prevent small dust or mold from affecting the measurement.

The sensor housing is designed to protect the sensor from long-term exposure to various weather conditions without damaging the internal components of the sensor. It is suitable for a range of radiation protection covers, including small radiation protection coversHygroVUE™ 10It can meet the monitoring applications in the vast majority of environments.

HygroVUE™ 10Adopting the latest generation of Swiss made products based onCMOSens^®The combination of relative humidity and temperature components in technology can provide high-precision and high stability measurements.HygroVUE™ 10Each component is calibrated separately and the calibration coefficient is saved on the internal storage chip of the component. You can replace sensor components on site without the need for separate calibration, minimizing downtime and calibration costs.

Advantages and Characteristics

u Use a combination of pre calibrated humidity and temperature components

u On site replaceable components for quick on-site recalibration

u numberSDI-12output,Allow long-distance communication

u Programming is easy to write

u low power consumption

u Wide working voltage range

u Durable and sturdy packaging design

u standardM12 connector, with a sealing rating of IP67

Details

install

When you use it outdoorsHygroVUE™ 10The standard practice is to install a casing outside the sensor, that is, inside a radiation shield. The radiation shield can prevent solar radiation from heating the sensor and causing measurement errors. The radiation shield also provides a certain degree of protection to prevent damage to the sensor caused by severe weather such as hail or rainstorm. The most common radiation shield is a relatively small, naturally ventilated, low rise cover that requires low maintenance and does not require power supply.

HygroVUE™ 10Designed for on-site measurement, the size is suitable for ordinary radiation shields.Campbell ScientiffcRecommended for useRAD10EThis radiation shield, you canRAD10EInstalled on vertical or horizontal poles.

On site calibration

Simply replace the sensor components to easily complete calibration. Since each sensor element is calibrated separately, there is no need to further adjust the sensor. This means that when you replace the component, it will restore the sensor to its factory calibrated temperature and humidity state without interrupting your measurement acquisition for a long time.

Technical Specifications