Horizontal screw belt mixer

• Under the feasibility factor, the mixing effect of the horizontal screw belt mixer is not affected by the size and density of the particles, and it also has a good mixing effect on viscous materials.
• The smooth mixing process reduces the damage to fragile materials, and the installation of a flying knife structure also has a crushing effect.
• The horizontal structure has a lower body height, making it easier to install.
• In the mixing structure, the forward and reverse rotating screw bars are installed on the same horizontal axis, forming a low-power and high-efficiency mixing environment.
• The horizontal screw belt mixer is mainly used for the production of putty powder and can also be used as an entry-level insulation mortar mixer.

Technical parameters of horizontal screw belt mixer:

notes：
*The mixing amount in the table is measured using powder with a specific gravity of 1 as the medium. The selection of the horizontal screw belt mixer should be calculated based on parameters such as the mesh size and specific gravity of the material.
*If there are working conditions such as high temperature, high pressure, flammability, explosiveness, corrosiveness, etc., detailed data must be provided for further selection and customization.
*The data in this table is subject to change without prior notice. The correct parameters are based on the actual horizontal screw belt mixer provided.
*This table does not include all device information. For more information, please contact our sales engineer.

Function selection of horizontal screw belt mixer：

1. Discharge method: Manual electric pneumatic
2. Main shaft sealing methodPacking seal packing+airtight mechanical seal
3. Blender form: Bidirectional continuous screw belt, unidirectional continuous screw belt, bidirectional break type screw belt, unidirectional break type screw belt
4. Drive modeDirect split type (belt/chain)
5. Mixing machine materialCarbon steel material in contact with stainless steel (SS304/SS316), all stainless steel (SS304/SS316) internal coatings
6. principal axis: Single segment multi segment
7. Cylinder openingStandard flange quick opening feeding port dust collector port manual feeding port side body cleaning door
8. Discharge valveButterfly valve, ball valve, plum blossom valve, flap valve
9. other: Liquid spraying/spray heating/cooling dedusting/temporary vacuum sampling

Click on the image to view more information about the mixer: