Horizontal U-shaped plow blade mixer

The horizontal U-shaped plow blade mixer is for dry powder mortarOne of the main equipment, the plow blade mixer is mainly composed of transmission parts, horizontal cylinder, plow blade assembly shaft, flying blade assembly, discharge valve, spray device and other components.
The plow blade mixer can be divided into two types: carbon steel and stainless steel
Transmission part: It is transmitted to the plow blade shaft by the main motor and reducer.
Horizontal cylinder: The upper part is equipped with a feed inlet and observation hole, and one side of the cylinder has a material cleaning door.
Plowing blade assembly shaft: Plowing blades are arranged according to their volume size, installed on the main shaft, and stirred with circular turbulent flow inside the cylinder to mix materials.
Flying knife group: The auxiliary motor is directly connected to the flying knife, and the high-speed flying knife has a strong scattering and shearing stirring effect.
Discharge valve: installed at the bottom of the cylinder for discharging materials.
Spray device: The spray device is arranged on the upper part of the cylinder, consisting of pipe fittings and nozzle components, and is fixed on the cylinder to evenly distribute and spray.
Customizable: jacket heating, cooling, drying type.
The plow blade mixer has a short mixing time and good adaptability to mixing materials with large differences in particle size and density. The structure of the plow blade mixer is particularly suitable for liquid mixing and wetting particles, with particle sizes between 0.3-3mm