BYSZ-IIY High Voltage Cable Safety‍Full stabbing device

I. Overview

Every year in China's power system, there are fatal accidents caused by manual sawing of live cables. This device can solve this problem by using a remote control automatic puncture device to perform a single damage puncture on the relevant cables on site. If the cable is live, there will be a sudden explosion when the cable is punctured, otherwise the cable will not be live.

During the construction process of power cables, it is often necessary to saw and cut the relevant cables when relocating or repairing them. To ensure the personal safety of operators.Firstly, it is necessary to confirm the identity of the cables to be processed on site. Especially to determine whether the relevant cables are live or not. Only after confirming that there are no errors can the relevant cables be sawed off again.

There are usually two methods to confirm the identity of the relevant cables on site: confirming through the original design and construction records; Confirm on-site with a cable live or non live identification device. The only way to confirm whether a cable is live without any problems is currently to use mechanical puncture to short-circuit the cable relative to ground or phase: manual mechanical puncture and remote control automatic puncture.

BYSZ-IIYHigh voltage cable safety stabbing device

2、 Main parameters

Mainly composed of a controller, remote control, and puncture gun body, it is a product independently and carefully developed by our company, Baifa Baizhong.A single gun can only generate one short circuit point on the cable at a time, while a double gun can generate two short circuit points on the cable at the same time.

★ Adopting wireless remote control method, with a remote control distance of more than 10 meters, it can be remotely controlled through walls, and its safety and reliability are higher than infrared. The control line is 5 meters long.

★ Dual use AC and DC, built-in 10Ah lithium battery, long charging time, continuous operation for more than 10 hours.

★ Card diameter width: 30-150mm.

★ Small size and light weight, very suitable for outdoor use

★ Working power supply: AC 220V ± 10% 50Hz/DC 12V 3A

★ Controller: 270 × 230 × 120mm 2.5kg

wholeSet: 470 × 380 × 210mm 15.5kg (dual gun)BYSZ-IIY）

Nail specification table:

Zi DanPower table：

Standard configuration:50 rounds of S1 Red (power level 5) bullets and 50 PS57C8 nails fired