- Phone
-
Address
B6-101, Zhongnan High tech Intelligent Manufacturing Industrial Park, No. 10 Shuangma Street, Yuetang District, Xiangtan City, Hunan Province
Product Categories
Hunan Zhenhua Analytical Instrument Co., Ltd
High temperature thermal conductivity tester for insulation materials
NegotiableUpdate on 06/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The DRX-I-SPB insulation material high-temperature thermal conductivity tester mainly tests the thermal conductivity of refractory materials, refractory ceramic fiber products, insulation bricks and insulation boards, low thermal conductivity refractory materials, powder materials, and other refractory products. Instrument reference standards: GB/T 17911.8-2002, YB/T 4130-2005 "Experimental Method for Thermal Conductivity of Refractory Materials (Water Flow Plate Method)", ASTMC201, ASTM C417, etc. The thermal conductivity meter adopts industrial PC for fully automatic control, with a friendly interface, high temperature control accuracy, and automatic recording and printing of test reports.
Product Details
DRX-I-SPBHigh temperature thermal conductivity tester for insulation materialsMainly testing refractory materials, refractory ceramic fiber products, insulation bricks and insulation boards, and other refractory productsthermal conductivityThermal conductivity of refractory materials, powder materials, etc.This instrument adopts the principle of flat plate method, and according to standards such as GB/T17911.8-2002, YB/T4130-2005, ASTMC201, ASTM C417, etc., it uses an embedded industrial computer to achieve fully automatic testing and control.
thermal insulationHigh temperature thermal conductivity tester for materialsMain technical parameters:
1.Thermal conductivity testing range:0.03～2.7w/m·k；
2.Instrument accuracy error: ≤5%Repeatability: ≤3%
3.Operating temperature: 200-1540℃
4.Heating rate:5～10℃/min
5. Temperature control accuracy:≤±1℃
6.Sample size requirement: 230 * 230 * 65mm;
7.Sample quantity: 1-3 pieces
8.Circulating water control system:10g/s.
9.The metering heating power can be adjusted or controlled by a computer;
10.Connecting computers to achieve fully automated testing,Data printing and output.
11.Total consumption rate of the whole machine: not greater than6KW.
12. The software operating environment is Win 10, 7, XP;
13. Power supply voltage: 220V 50HZ
Main configuration:
1TheDRX-I-SPBhost a
2Constant temperature water bath a set
3Testing software a set
4Lenovo desktop computer a set
5Heating element (silicon molybdenum rod) a set
