High temperature forward and reverse speed sensor

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

High temperature forward and backward speed sensors are used to detect the speed and linear velocity of the wheel axle, and the speed of the measured object can also be obtained through calculation and processing. This sensor has good low-frequency and high-frequency characteristics. Low frequency can reach 0Hz, used for zero speed measurement of rotating machinery, up to 20KHz, which can meet the high-speed measurement requirements of the vast majority of industrial fields. The sensor can provide two types of speed signals with a certain phase difference, thus enabling forward and reverse discrimination. Easy installation, no contact with the measuring gear, no wear, output waveform is square wave, with a duty cycle of about 50%; Wide speed measurement range, wide temperature adaptability, strong vibration resistance, power polarity protection, and short output

Product Details

High temperature forward and reverse speed sensor

1.Introduction:

High temperature forward and reverse speed sensorUsed to detect the rotational speed and linear velocity of the wheel axle, the speed of the tested object can also be obtained through calculation and processing. This sensor has good low-frequency and high-frequency characteristics. Low frequency can reach 0Hz, used for zero speed measurement of rotating machinery, up to 20KHz, which can meet the high-speed measurement requirements of the vast majority of industrial fields. sensorTwo speed signals with a certain phase difference can be provided, so forward and reverse discrimination can be performed.Easy installation, no contact with the measuring gear, no wear, output waveform is square wave, with a duty cycle of about 50%; Wide speed measurement range, wide temperature adaptability, strong vibration resistance, power polarity protection and output short circuit protection, in compliance with DIN867 standard.

2.characteristic

● High sensitivity; High reliability; Long lifespan; Long triggering distance

● Signal triggered by iron (soft) magnetic material

● Can achieve long-distance transportation

Strong ability to resist electromagnetic interference

● Good impact resistance and earthquake resistance

3. Technical parameters

Frequency response characteristics: 0-20kHz

Number of output channels: dual channels

Output waveform: square wave, rising and falling edge time of 12 μ s ± 40%

Output amplitude: High level: U-0.7 (U: power supply voltage), Low level:<0.1V

Pulse duty cycle: 50% ± 25%

● Phase difference: 90 ± 30 ° (DI channel leading)

Note: Depending on the installation method and the direction of rotation of the rotating parts, this parameter is applicable to the installation method illustrated in Figure 4 of this manual

● Load capacity: 20mA (maximum)

Output impedance: ＜ 47 Ω

Power supply voltage: Ub=+24VDC (5V~26V)

Power consumption current: ≤ 35mA

Working temperature: -40 ℃ to+125 ℃

● Vibration resistance: vibration (10Hz~2KHz) 30g, impact 100g

Sealing performance: IP68

● Power polarity protection: Yes

● Output short circuit protection: Yes

● Insulation strength: 1000V 50Hz, 1min (channel and shell)

Shell material: Stainless steel 304 (other materials can be used according to user requirements)