High temperature drying room | drying room

High temperature drying room | Drying room | High temperature drying room | High temperature drying room 1. High temperature drying room | High temperature drying room equipment Product introduction: It is designed for high-performance electronic products such as frequency converters and computer machines

High temperature drying room | High temperature drying room Shanghai Tai Test Germany

1High temperature drying room | High temperature drying roomEquipment Product Introduction: It is a high-temperature and harsh environment testing device designed for high-performance electronic products (such as frequency converters, computer machines, displays, terminals, automotive electronic products, power supply motherboards, monitors, exchange chargers, etc.). It is an important experimental equipment to improve product stability and reliability, and an important production process for various manufacturing enterprises to improve product quality and competitiveness. This device is widely used in power electronics, computers, communications, automotive electronics, pharmaceuticals, biotechnology, optoelectronic products, military industry, scientific research and other fields.

IIHigh temperature drying room | High temperature drying roomModel and size:
The specific internal and external dimensions of the house can be customized according to the site conditions, product types, actual product needs, and the size of the aging car.

IIIHigh temperature drying room | High temperature drying roomTemperature range:
Type A test temperature range: normal temperature -85 degrees, insulation material is hard polyurethane foam.
B-type test temperature range: normal temperature -85 degrees, insulation material is rock wool.
C-type test temperature range: normal temperature -55 degrees, insulation material is polystyrene.
D-type test temperature range: normal temperature -120 degrees, insulation material is special grade rock wool.

4High temperature drying room | High temperature drying roomInsulation material:
Choose from four materials (75mm, 100mm, 150mm thick): polystyrene, rock wool, hard polyurethane foam, or a combination of rock wool and hard polyurethane foam.
Customers can choose based on their actual temperature requirements, product heat generation, appearance, and cost-effectiveness.

5High temperature drying room | High temperature drying roomFunction:
1. Efficient and energy-saving:(The time from room temperature to the set working temperature (unloaded) is less than 30 minutes, and the heating power after constant temperature is less than 15% of the total heating power. During the electrical aging process of the product, the instrument control system automatically calculates the thermal energy generated by the product, the ambient temperature in the high-temperature room, and the set temperature to obtain the minimum heating power, ultimately achieving energy-saving goals.
2. Temperature control system: using high-precision imported digital instruments to automatically control the temperature, with the ability to set the temperature arbitrarily within the range of use; When the temperature exceeds the limit, the heating system power supply will automatically shut down for protection, and at the same time, sound and light alarm functions will be activated.
3. Timer system: equipped with a digital timer, users can set the aging time according to process requirements, automatically cut off the heating system at the set time, and give an alarm prompt. The maximum one-time time setting is 999 hours, and the minimum resolution is 1 minute.
4. Keyboard Lock: All temperature control instruments come with a keyboard lock function. Authorized operators can lock the aging temperature parameters to prevent unauthorized individuals from changing them
5. Lighting system: The internal lighting system is equipped with explosion-proof lamps.

VIHigh temperature drying room | High temperature drying roomMain technical parameters:
1. Temperature range: normal temperature~+120 ℃
2. Temperature fluctuation: ± 0.5 ℃;
3. Temperature deviation: ≤ 2 ℃; (Data measured at 45 ℃ under no-load conditions)
4. Operation mode: Temperature adjustable, constant operation (program running)
5. Heating power: determined according to the size of the aging room
6. Installation power supply: 380V; 50 Hz; If it is a 220V power supply, the minimum current required for our installation is 120A.

7High temperature drying room | High temperature drying roomControl system and safety protection measures:
1. The electrical control design shall refer to the "Code for Design of Low Voltage Distribution" GB50054-95, "Code for Design of Power Supply and Distribution" GB5002S2-95, and "Code for Construction and Acceptance of Grounding Devices in Electrical Equipment Installation Engineering" GB50169-92, in order to standardize the electrical control design.
2. Design of integrated aging function for control system. Design a functional control cabinet, where the aging time, temperature, and various operation switches can be operated on one control cabinet; The panel design of the electrical cabinet is aesthetically pleasing and easy to operate.
3. The aging process can be fully controlled automatically, with some abnormal self processing functions, making the operation automated and simplified.
a. Cut off the power supply of circulating fans, electric heaters, etc; The aging room will cool down on its own and continue aging. When the total aging time is up, the yellow warning light will light up to indicate that aging is complete.
b. Product over temperature protection control. When the temperature exceeds the upper limit of the product aging temperature, the power supply to the product is automatically cut off to protect it from overheating and aging, which affects its performance; At the same time, the buzzer will sound an alarm and the red warning light will light up. Normal temperature automatically restores power supply.
4. It has multiple protection functions and is safe and reliable.
a. Electric heating prevents dry burning. When the fan fails or the temperature inside the air duct is too high, the entire power supply will be automatically cut off, and the alarm will sound.
b. The design of electric heating and fan linkage means that the heater cannot be started separately when the fan fails to start.
c. The heater connection adopts high-temperature resistant wire, which does not burn at 300 ℃.
d. Install 60W explosion-proof lighting indoors to extend the lifespan of light bulbs and prevent them from bursting.
e. The warehouse body adopts flame-retardant insulation materials with good insulation performance and high safety factor.
f. Overtemperature sound and light alarm function: In case of overheating during the aging process, the red light will turn on and the buzzer will sound.

8High temperature drying room | High temperature drying roomStructure and Material Description:
The main system materials are rock wool and polyurethane sandwich panels, and the combustion performance of the product meets the requirements of B2 level in the "Classification of Combustion Performance of Building Materials".
1High temperature drying room | High temperature drying roomWall material: Warehouse body five/Six sided (optional) assembled with double-sided color steel insulation panels, fixed support aluminum beams, and aluminum profile panels with edges; The ground is not treated, and sealed glass glue is applied at the joints to effectively ensure the sealing of the room. Product aging vehicles can be placed indoors according to requirements.
Among them, the exterior wall material: wall panel: 1mm thick color steel plate;
Ceiling: 1mm thick color steel plate;
Door panel: 1mm thick color steel plate;
Among them, the interior wall material: wall panel: 1mm thick color steel plate;
Ceiling: 1mm thick color steel plate;
Door panel: 1mm thick color steel plate;
2. Door opening setting: W 800 × 2000mm, (double or single door, customized according to needs);
3. Observation window: 400 × 600mm, tempered glass, installed on the door, can observe the indoor working conditions at any time during the aging process (or according to requirements).
4. The heater is placed in the circulating air duct on the aging roof, surrounded by fire-resistant insulation materials. Adopting PID temperature module control, after the temperature reaches the required temperature of the product, the power of the heater is automatically adjusted according to the fluctuation of indoor temperature, and the insulation performance of the insulation board is matched to ensure that the indoor temperature is accurately and stably at the set temperature value.
High temperature drying room | High temperature drying roomStructure: Adopting a plug-in and assembled structure, easy to move.
High temperature drying room | High temperature drying roomSpecifications: The size of the aging chamber can be designed and manufactured according to customer needs.

The heating power varies depending on the usage temperature and specifications. For example:
Example 1: External specifications: 5200 mm x 4000mm x 2350 mm (length x width x height)
1. Heating total power: 8 KW, main heating power 6 KW, auxiliary heating power 2 KW
2. Heating rate: The high-temperature aging room (unloaded) takes less than 30 minutes to reach the set working temperature from room temperature
The heating power after constant temperature is less than 15% of the total heating power.
Example 2: External specifications: 10000mm x 4000mm x 2200mm (length x width x height).
1. The total heating power is 11 KW, the main heating power is 9 KW, and the auxiliary heating power is 2 KW
2. Heating rate: The high-temperature aging room (unloaded) takes less than 30 minutes to reach the set working temperature from room temperature, and the heating power after constant temperature is less than 15% of the total heating power.

9High temperature drying room | High temperature drying roomAir conditioning system
The wind duct system complies with the "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" GB50243-2002 standard.
1. The hot air circulation system adopts the concept of downward supply and upward circulation, with large capacity fans forcing air circulation.
2. Wind power is divided into exhaust system and circulating air system. Two systems work independently.
3. The exhaust system exhausts excess indoor heat to the outside when the indoor temperature exceeds the required temperature of the product
4. The exhaust system adopts the design concept of combining air ducts and fans, and the circulating fan continuously circulates the air in the room through convection; Ensure indoor temperature uniformity.
5. The heater is installed on the aging roof. Using PID control, after the temperature reaches the required temperature of the product, the electric heating output power is dynamically and automatically adjusted according to the outdoor temperature, fully improving the accuracy of indoor temperature.
6. More silent ≤ 65dB, better ensuring a good office environment and working environment for operators.

10High temperature drying room | High temperature drying roommeasurement and control system
1. Temperature measurement: K-type thermocouple.
2. Control instrument: imported, high-precision digital temperature controller, PID regulation, accuracy of 0.1.
3. Control output: Solid state relay SSR output.
4. Electric control box: one set, the main electrical appliances are imported from Schneider, Omron and other sources