Drying oven

NegotiableUpdate on 11/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Drying oven | Drying oven | Oven precision drying oven | Drying oven | Oven | Oven * Product use (Highland low temperature humiditytestchamber) Precision drying oven | Drying oven | Oven | Oven is used for drying, baking, wax melting, sterilization in industrial and mining enterprises, laboratories, scientific research units, etc; It is also particularly suitable for drying tests of electronic components, rubber and plastic, and decorative materials

Product Details

Drying oven

Precision drying oven | Drying oven | Oven | OvenShanghai Tai Test Germany

﹡产品用途 ( High and low temperature-humidity test chamber )

Precision drying oven | Drying oven |oven| OvenUsed for drying, baking, wax melting, and sterilization purposes in industrial and mining enterprises, laboratories, research institutions, etc; It is also particularly suitable for drying tests of electronic components, rubber and plastic, and decorative materials.

Characteristics of Box Structure ( High and low temperature test chamber )

The shell is made of high-quality steel plate and the surface is sprayed with high-temperature plastic.

The studio uses high-quality stainless steel mirror panels and is equipped with two partitions that can be adjusted in height.

Controller

Dual screen high brightness wide window digital display, clear and intuitive indication.

Solved the drawbacks of traditional PID control technology, such as multiple parameter tuning and temperature overshoot.

It has a tracking and alarm function.

There are yellow and green signal lights displayed for standby mode and working heating mode.

Temperature Control System

Microcomputer intelligent control of heating power and display of heating status, precise and stable temperature control.

The temperature control output power is calculated by a microcomputer, and the heating power is automatically controlled according to the size of the internal load to achieve high precision and efficiency

Efficiency of electricity consumption.

The degree control is PID microcomputer automatic calculation of PV/SV and simultaneous display, with button settings fixed.

Supply air circulation system

The heat of the electric heater placed inside the bottom of the box is discharged upward through three air ducts, and then sucked in by the centrifugal fan at the bottom after passing through the dried material, forming a reasonable air duct that can fully circulate the hot air and maximize the uniformity of the temperature inside the box.

Compliant with the standard

GB/T2423.1-200, GB 11158-89, etc.

Specifications and technical parameters

Model (MM)		T-ready 250	T-ready 275	T-ready 345	T-ready 524	T-ready 600
studio dimensions (Length * Height * Width)		250﹡250﹡250	300﹡275﹡300	415﹡345﹡37O	554﹡524﹡370	600﹡600﹡500
performance metrics	temperature range	RT (room temperature)+5 ℃~200 ℃
	Temperature Uniformity	≤±2℃
	temperature fluctuation	Temperature: ≤± 1 ℃
	Instrument analysis accuracy:	0.1℃
	heating rate	From room temperature to 200 ℃, about 30 minutes
control system	controller	LCD screen digital display P, I, D+S, S, R. microcomputer integrated controller
	Operation mode	Single point constant operation
	sensor	Platinum PT100 sensor
	heating system	Microcomputer intelligent control of heating power, nickel chromium alloy electric heating method and display of heating status. The temperature control output power is calculated by a microcomputer, and the heating power is automatically controlled according to the size of the internal load to achieve high precision and efficiency Efficiency of electricity consumption.
	Wind circulation system	The heat of the electric heater placed inside the bottom of the box is discharged upward through three air ducts, and then sucked in by the centrifugal fan at the bottom after passing through the dried material, forming a reasonable air duct that can fully circulate the hot air and maximize the uniformity of the temperature inside the box.
Use material	outer box material	High quality steel plate, surface high-temperature spray coating
	Inner box material	High quality stainless steel mirror panel
	Insulation material	High strength, high-density ultra-fine glass fiber cotton
	Door frame insulation	Test the door and body using high and low temperature resistant high tension sealing strips
Standard Configuration		Test empty (customer specified), timer 9999min, stainless steel compartment rack (two or customer specified)
safety device		Leakage, short circuit, overheating, motor overheating, overcurrent protection, tracking alarm
timer function		Adjustable from 0.1 to 999.9 (S, M, H)
Voltage power supply		220（1+10%）V，（50±0.5）HZ
Usage environment		Temperature: 5-35 ℃, humidity: ≤ 85% RH; air quality: no high concentration dust or corrosive gases, and cannot be tested or stored in flammable and explosive gases; The ground is flat and well ventilated; There should be at least one passing space around the equipment, which is ≥ 600mm; there should be a space for the equipment box door to open and close normally, and there should be no other objects in front of the equipment box door.
Optional accessories		Recorder (records changes in temperature parameters → printable)
Note: 1. T → representsTai Shi De. 2. The above data are all at an ambient temperature (QT) of 25 ℃ Measured under no-load conditions in the studio 3. Customized according to specific user requirementsDual purpose drying and cultivation test chamber。