High and low temperature thermal shock test chamber (three chambers)

NegotiableUpdate on 06/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

High and low temperature thermal shock test chamber (three chambers)

Product Details

High and low temperature thermal shock test chamber (three chambers)

The high and low temperature thermal shock test chamber is suitable for industries such as electronics, automotive parts, plastics, etc., to test the repeated impact ability of various materials on high and low temperatures. Detect the chemical changes or physical damage caused by thermal expansion and contraction of the product to ensure its quality.
Meet standards: The product meets CNSMIL, IEC, JIS, and other standards
Characteristics of high and low temperature thermal shock test chamber:
1. The test sample will automatically guide the temperature shock in the pre cooling zone, room temperature, and preheating zone when it is stationary.
The testing range is from 2.60 degrees Celsius to minus 10 degrees Celsius.
3. The temperature conversion time for cold and hot shock is within 8 seconds, and the recovery time is within 5 minutes.
Product Name: High and Low Temperature Thermal Shock Test Chamber (High and Low Temperature Shock Test Chamber/Thermal Shock Test Chamber)
Product model: HS-TC-150
Studio size: 500 x 600 x 500mm; (depth x width x height)
Main technical indicators of high and low temperature thermal shock test chamber:
Impact temperature:+200~-65 ℃;
Temperature range: High temperature chamber:+60 ℃~200 ℃;
Low temperature box: 0 ℃~-70 ℃;
Temperature fluctuation: ± 0.5 ℃;
Temperature uniformity: ± 2 ℃;
Heating rate: ≤ 5 ℃/min; (Average throughout the entire process)
Cooling rate: ≤ 5 ℃/min;; (Average throughout the entire process)
Pre cooling lower limit temperature: ≤ -70 ℃;
Impact temperature:+150~-60 ℃;
Sample rack size: 150 × 150mm;
Temperature recovery time: 5 minutes;
Sample rack conversion time: ≤ 10s;
Impact mode: up and down moving basket or flip plate
Power supply: 380V ± 10% 50Hz
In order to ensure the cooling rate and minimum temperature requirements of the test chamber, this test chamber adopts a binary cascade air-cooled refrigeration system composed of an imported French "Taikang" fully enclosed compressor. The cascade refrigeration system includes a high-temperature refrigeration cycle and a low-temperature refrigeration cycle; Original imported LCD display touch screen direct button type controller, with a wide viewing angle of 7.5 "graphics in Chinese, high contrast, and a large LCD display controller with adjustable backlight function.
The above parameters are for standard models. If you have special requirements, we will design products that meet your needs.
Note: This product comes with free home delivery, free installation and debugging, and professional training for customer operators. The entire product comes with a one-year free warranty and lifetime service!