Handheld pump suction sulfur dioxide gas detector

NegotiableUpdate on 02/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Adopting imported brand sensors and their * circuit design, industrial grade fast brushless air pump, mature fast core system, can timely capture hazardous gases and display gas concentration in a timely manner

Product Details

Equipment parameters

Detection method	pump-suction type
measurement gas	sulfur dioxide
measurement range	0-100ppm；0-20ppm；(Range options not listed)
Detection Principle	electrochemistry
Testing Unit	%VOL、%LEL、mg/m3、ppm、 Multiple units to choose from;
resolution	0.01ppm；(Depending on the range)
precision	3%F.S
repetitiveness	1%F.S
display mode	2.5-inch dot matrix display screen
data recording	Up to 80000 records, can be set once/1s, once/10s, or once/60s
response time	30S
automatic diagnosis	Functions such as battery level/display/sensor/hardware failure
Explosion proof type	Inherent safety design
Weight	0.26kg
working conditions	0~90% RH atmospheric pressure 0.1MPA temperature: -20-50 degrees
size	135mm in length, 65mm in height, and 35mm in width
data recovery	Convenient and fast, one click factory reset
standard	GB 12358-2006、GB 3836.1-2010、GB 3836.4-2010
Factory accessories	Instruction manual, charger, aluminum packaging box, test report, warranty card, certificate of conformity

Sulfur dioxide (chemical formula: SO2), also known as sulfite, is the most common sulfur oxide and the main component of sulfuric acid feed gas. Sulfur dioxide is colorlessgasIt has a strong pungent odor and is one of the main pollutants in the atmosphere. During volcanic eruptions, this gas is released, and in many industrial processes, sulfur dioxide is also produced. Due to the presence of sulfur compounds in coal and petroleum, sulfur dioxide is generated during combustion. When sulfur dioxide dissolves in water, it willformationSulfuric acid (the main component of acid rain). If SO2 is further oxidized in the presence of a catalyst (such as nitrogen dioxide), sulfuric acid (H2SO4) will be generated, which can corrode the skin when used with caution.