HRY11 Top mounted angle ruler electric heater

1、 Purpose:

HRY11 Top mounted angle ruler electric heaterMainly used for heating media in hydraulic lubrication, it can also be used to heat non corrosive gases.

2、 Characteristics:

1. This electric heater is a top mounted angle ruler type electric heater, which can be installed on the top plate of oil tanks and containers, and is easy to install, disassemble, inspect, and replace. More reliable than when installed on the side of the fuel tank, eliminating the possibility of oil leakage due to connecting flanges and gaskets. The electric heater can be replaced without draining the oil tank. Save the maintenance space for replacing the electric heater on the side of the fuel tank.

2. The A size of the electric heater can be customized by the user according to their needs. There are various specifications for surface load to choose from, and reasonable selection can prevent oil carbonization and burning; **Reliable and extend the service life of the medium. The installation hole of SRY5-II type is φ 90, and the A and B sizes of various specifications of heaters can be customized according to the usage environment.

3. Special voltage power electric heaters can be produced according to customer requirements, and temperature control devices can be added to the heater according to actual situations.

3、 Main technical parameters:

1. Metal tubular electric heating element

Rated voltage: 220V, 380V

Component metal tube allows high temperature of 170 ℃ -400 ℃

Heating medium: mineral oil, water

Electric heater power 1-6 (KW)

Surface load of electric heater 4.4 w/cm2 1.2 w/cm2 0.7 w/cm2

2. The electric heater extends into the medium of the box and the heating length of the electric heating tube

Surface load 1.2w/cm2-280-1660mm

Surface load 0.7w/cm2-500-2850mm

HRY11 Top mounted angle ruler electric heaterTechnical parameters and main dimensions: