German EUCHNER Ansergy Relay

German EUCHNER Ansergy RelayESM-CB-AZ-FI2-BR-IO-158875 (Order Number 158875)

IO Link gateway, equipped with relay outputs for BP/BR switches

IO Link devices are used to read process and device data from BP/BR safety switches and transmit the data to higher-level control systems

The door lock that controls the BP/BR switch depends on the switch used

The width of the compact model is only 18 mm

Install the guide rail

LED status indicator light

Sensor circuit 1: Use floating contacts to connect single or dual channel safety switches: short circuit, ground fault, and ground fault detection

Sensor circuit 2: Connect 2 safety outputs of BP/BR switch

Used as a safety relay with two outputs

Can connect the start button and feedback loop

Safety relay: Apply the highest safety protection level 4, according to EN ISO 13849-1

German EUCHNER Ansergy RelayWiring options

The following functions can be connected using the corresponding wiring:

Automatic start function or start input of monitored start button

Downstream relay or connector monitoring (feedback loop)

Short circuit monitoring function used to detect whether there is a short circuit between connecting cables and to turn off the output or prevent relay activation when necessary

Ground fault monitoring function used to detect whether there is a short circuit between the connecting cable and the ground, and to turn off the output or prevent the relay from starting when necessary

relay output

The output adopts redundant design and electrical decoupling.

Simultaneously monitor safety outputs to monitor safety components over time.

No delay closure

Industry 4.0 readiness

EUCHNER Ansoneng RelaySend processing data to the control system through IO Link loop. These data include all status signals, such as the position of safety doors and door locks, as well as indicating whether the switch is within the working distance limit.

The processed data can be used for control systems after 200 ms and can also be used for automatic processing.

In addition, non cyclic polling can be used to collect environmental data such as internal switch temperature, applied voltage or ID of the transponder used, as well as other values.

Plug and play series connection

The interface of the safety switch uses BR technology instead of addressing individual switches

Reduce wiring and configuration work to a certain level.

Equipment data and events

EUCHNER Ansoneng RelayThe advanced control system can poll over 30 different information items from the connected switches. Comprehensive data transmission through IO Link enables targeted preventive maintenance.

Simple implementation of innovative applications

The device data from the trigger block used can be used to detect the position of a single turntable or different containers.

For more products, please refer to:EUCHNER Ansoneng Relay