EUCHNER safety lock from Germany

EUCHNER safety lock from GermanyCTP-AS series safety lock

advantage

Integrated AS-i connector

Durable shell, IP67/IP69/IP69K protection level

compact design

Locking force 3900 N

Comprehensive and detailed diagnostic selection

Compatible with existing electromechanical safety switches for installation

Design and Performance

EUCHNER safety lock from GermanyCTP-AS can operate directly on the AS-i bus and provide information on door position and lock position for the control system. Information about possible faults within the switch can also be diagnosed directly within the control system.

The mature operations performed on the AS-i security monitor are something that should be done as a matter of course. The electromechanical safety switch can be adjusted from CTP to PL e level without modifying the software of the monitor.

CTP-L1-AS1B-U-HA-AE-SJ-126644 (Order Number 126644)

CTP ASi safety switch with protective locking function, RFID, M12 plug-in connector, release device

AS-i

Power on unlock

special encoding

4-pin M12 connector plug

Emergency escape unlocking device

Can be adjusted with a 90 degree increase

EUCHNER safety lockDoor lock principle

Power on unlocking: If the door lock function on the protective device is based on the principle of electrolytic locking, the protective device will be locked by spring force until the electromagnetic coil of the door lock is powered on. Unlocking is achieved through electromagnetic force. Also known as mechanical locking.

Special code security assessment

Each trigger block has been encoded with advanced encoding (special encoding). The switch only recognizes the initialization trigger block and can also initialize additional trigger blocks.

At any time, the security assessment unit can only recognize the most recently initialized trigger block.

Control of locking electromagnetic coil

The locking electromagnetic coil is controlled through the AS-i interface position D0. In order to achieve safe control of the door lock, it is also necessary to safely connect the auxiliary voltage.

auxiliary voltage

ASi auxiliary voltage is required to supply power to the locking electromagnetic coil.

AS-i input

D0, D1

Monitor the position of the security door

D2, D3

Door lock status monitoring

AS-i output

D0

EUCHNER Safety LockDoor lock device control

LED indicator light

The ASi LED indicates the status of the ASi bus.

The State LED indicates the status of the switch.

The LOCK/DIA LED indicator shows when the door is locked and whether the switch has detected a fault.

Emergency escape unlocking device

Used to manually unlock the locking function in hazardous areas without using tools.

For more products, please refer to:EUCHNER Safety Lock