GCD40X series RF admittance level meter

NegotiableUpdate on 05/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Capacitance measurement is a widely applicable level measurement method, in which a sensor is attached to a container to form two electrodes of a capacitor, and the capacitance value is measured

Product Details

Working principle

Capacitance measurement is a widely applicable level measurement method, in which a sensor is attached to a container to form two electrodes of a capacitor, and the capacitance value is measured

It changes with the level of the material medium in the container and is converted into a corresponding level output signal. There are different versions of materials for cables and rods

Materials can be selected, and there are partially insulated cables and rods available.

Product Features

Radio frequency admittance level meter has the following advantages:

·Easy to maintain, cost-effective, and widely applicable;

·Zero point full-scale on-site calibration, simple operation, accurate and reliable measurement;

·The measurement effect is better for materials such as powder particles;

·The process connection size is small, making it easy to install with holes;

·Improved adaptability for measuring small and special tanks;

·The measurement blind spot is small, which maximizes the measurement range;

·Can be installed in various metal and non-metal containers, with no harm to human body or environment;

·Good directionality, especially for special and irregular tanks, with low transmission loss and multiple measurable media.

Technical Parameter

·Measurement accuracy

<0.5% actual measured value

·Measurement range

0~3000pF minimum

·Measurement frequency

700kHz maximum

·Long term stability

Better than 0.1% annually

·Temperature stability

The maximum temperature drift is 0.3% of the actual capacitance value

·Allowable working temperature

＜200℃

·Allow ambient temperature

-35℃~65℃

·Allow storage temperature

-35℃~65℃

·Allow work pressure

0.1~3MPa

·Supply voltage

24VDC

·Minimum dielectric constant

1.8

·Shell

Die cast aluminum (surface spray coating)

·Process Connection

External thread G3/4”Or G 1”Clamp type DN32 (φ 50.5)

Flange installation DN50 PN1.6 9123-2000

·Sensor probe

Rod type: 16mm/10mm stainless steel 316 without sheath,

19mm/12mm stainless steel 304 with protective cover

Cable type: 5mm/8mm stainless steel 316 without protective cover

3mm/8mm stainless steel 304 with protective cover

·Signal output

Contact signal 4-20mA

·Cable access port

M20*1.5

·Protection level

IP65

Exterior structure

Electrical connection

Order Selection Table

Working principle	Capacitance measurement is a widely applicable level measurement method, in which a sensor is attached to a container to form two electrodes of a capacitor, and the capacitance value is measured
	It changes with the level of the material medium in the container and is converted into a corresponding level output signal. There are different versions of materials for cables and rods
	Materials can be selected, and there are partially insulated cables and rods available.

Product Features	Radio frequency admittance level meter has the following advantages:
	·Easy to maintain, cost-effective, and widely applicable;
	·Zero point full-scale on-site calibration, simple operation, accurate and reliable measurement;
	·The measurement effect is better for materials such as powder particles;
	·The process connection size is small, making it easy to install with holes;
	·Improved adaptability for measuring small and special tanks;
	·The measurement blind spot is small, which maximizes the measurement range;
	·Can be installed in various metal and non-metal containers, with no harm to human body or environment;
	·Good directionality, especially for special and irregular tanks, with low transmission loss and multiple measurable media.

Technical Parameter	·Measurement accuracy	<0.5% actual measured value
	·Measurement range	0~3000pF minimum
	·Measurement frequency	700kHz maximum
	·Long term stability	Better than 0.1% annually
	·Temperature stability	The maximum temperature drift is 0.3% of the actual capacitance value
	·Allowable working temperature	＜200℃
	·Allow ambient temperature	-35℃~65℃
	·Allow storage temperature	-35℃~65℃
	·Allow work pressure	0.1~3MPa
	·Supply voltage	24VDC
	·Minimum dielectric constant	1.8
	·Shell	Die cast aluminum (surface spray coating)
	·Process Connection	External thread G3/4”Or G 1”Clamp type DN32 (φ 50.5)
		Flange installation DN50 PN1.6 9123-2000
	·Sensor probe	Rod type: 16mm/10mm stainless steel 316 without sheath, 19mm/12mm stainless steel 304 with protective cover
		Cable type: 5mm/8mm stainless steel 316 without protective cover 3mm/8mm stainless steel 304 with protective cover
	·Signal output	Contact signal 4-20mA
	·Cable access port	M20*1.5
	·Protection level	IP65