Fully automatic online SDI analyzer, intelligent membrane replacement method

Product Introduction

GTAK SDIFully automatic onlineSDIAnalyzer, automatic and continuous detectionROThe pollution index of incoming water,Eliminating manual detection errors, it can quickly and accurately reflectROThe effect of preprocessing. Widely used in reverse osmosis water inletSDIValue detection.

Product Features:

*comply withASTM4189-23（2023Annual Standard

*Automatic replacement of filter membrane, automatic exhaust, automatic precise adjustment of set pressure testing

*integratedMCEThe filter membrane is different from the roll type composite filter membrane in that there is no side leakage at the membrane edge, making it more accurate

*Volumetric measurement has better repeatability and accuracy than sensor measurement, and is more in line with standards

*Can achieve remote monitoring, wireless remote notification of test data to relevant personnel

Technical Indicators:

Measurement range:0.2~6.67(SDI15min)

Accuracy: ±0.2(SDI15min)

Sample conditions:300~500kPa，5~45℃

Minimum traffic:1.2L/min

Test pressure:207kPa（30psi）Automatic voltage regulation

Water sample container:150mL

Filter membrane specification: φ25mm, aperture0.45Mm±0.02Mm

Pipeline connection: water inlet,Ø6.5mm(Outer diameter) quick insertion; Out of the water,DN50Pipe Undertaking

Display panel: 7Inch touch screen

Output signal:RS485The4~20mA

Usage environment: temperature,5~45℃； Humidity,10~95% RH(No condensed water)

Power supply:DC24V(Optional)AC220VPower supply)

Whole machine power:<100W

Overall dimensions:ABSshell600×500×250mm

Total weight of the machine<40kg

Protection level:IP58

Ordering Guide: