Fully automatic flip oscillator

A fully automatic flip oscillator is an electronic device that can generate stable oscillation signals and automatically switch the frequency or amplitude of the output signal when a set threshold is reached. This type of oscillator utilizes a feedback loop to maintain oscillation and has internal circuits or algorithms to achieve automatic frequency or amplitude adjustment. By using feedback mechanisms and automatic control techniques, a fully automatic flip oscillator can stably generate the expected oscillation signal within a given operating range.

1、 Product Introduction:

A fully automatic flip oscillator is an electronic device used to generate stable signal waveforms. It usually consists of a feedback circuit and an amplifier. The feedback circuit in the oscillator feeds back a portion of the output signal to the input terminal, causing the system to oscillate through positive feedback.

The fully automatic flip oscillator has a special design that can automatically adjust the operating frequency to maintain stability. It uses additional circuit components such as capacitors, inductors, or transistors to achieve frequency control and stabilization.

The working principle of this oscillator is based on a balance between negative feedback and positive feedback. By utilizing a feedback loop, a portion of the output signal is sent back to the input terminal to enhance self-excited oscillation, thereby generating a stable periodic signal.

The fully automatic flipping oscillator is mainly used for mixing and oscillating samples in the laboratory, which achieves uniform mixing and dissolution of samples through periodic flipping actions. This product is not only suitable for the flipping method experiment of leaching toxicity of solid waste, but also widely used in production experiments and scientific research in industries such as environmental protection, solid waste disposal, pharmaceuticals, chemical engineering, and teaching.

2、 Characteristics:

1. Material: Made entirely of stainless steel, with a beautiful and elegant appearance, easy to clean.

2. Push pull protective cover and leak proof design ensure safe operation of the equipment.

3. A reliable safety device with functions such as overload protection, leakage protection, and automatic power-off when the protective cover is opened.

4. Real time temperature control with small temperature fluctuation range.

5. Disk or clip on fixation ensures the sample bottle is secure.

6. Speed digital display adjustment, flip mode and rotation time can be set by oneself, and the sample oscillation effect is good.

7. Provide multiple flipping modes, including forward rotation, reverse rotation, forward and reverse rotation, high speed, and low speed.

8. Long term continuous operation is smooth, with low noise, high load-bearing capacity, easy maintenance, long service life, and good compatibility.

9. Practical containers: can hold 2L glass bottles, PE bottles, PTFE bottles, and zero empty extraction containers (ZHE).

10. Various small-sized volumetric flasks and test tube type flip oscillators can also be customized as needed

3、 Maintenance and upkeep

In order to ensure the long-term stable operation and extend the service life of the fully automatic flip oscillator, users need to regularly maintain and upkeep the equipment. This includes cleaning the surface of the equipment, checking whether the power cords and plugs are intact, and regularly inspecting whether the internal components of the equipment are loose or damaged. In addition, users need to follow the operating procedures of the equipment to avoid equipment damage or safety accidents caused by improper operation.

4、 Technical parameters:

1. Timing range: 0-9999 minutes

2. Temperature control range: Room temperature+10-60 ℃, maximum temperature control of 60 ℃

3. Temperature control accuracy: ≤± 0.1 ℃

4. Temperature fluctuation: ≤± 2 ℃

5. Power supply; 220v 50Hz 。

6. Power: 500W.

7. Capacity: 2L, multiple sample bottles

8. Speed: 0-60 ± 2 revolutions per minute can be adjusted freely

5、 Maintenance:

After each use of the equipment, it is necessary to clean the inside and outside of the equipment.

2. Regular attention should be paid to anti-corrosion measures for the plating and coating of equipment to prevent corrosion. The outer surface of the equipment can be polished with car wax.

3. The electric motor needs to be regularly inspected and cleaned, and dust should not accumulate to avoid affecting the normal operation of the motor; If there is any special noise or abnormal surface temperature (temperature rise greater than 70 ℃) during the operation of the motor, it should be stopped immediately for inspection. If the bearing is damaged, it should be replaced in a timely manner; If the impeller falls off or becomes loose, it should be tightened; If the positioning fasteners of the motor become loose and cause displacement, they should be reset; If there is a lack of lubricating oil, calcium sodium based grease can be used for lubrication. Please pay attention to maintenance