Full temperature shaker

1、 Product Introduction:

KXY-1210Full temperature shakerIt has bidirectional temperature control functions for heating and cooling, as well as oscillation function. It is a biochemical instrument that effectively combines a biochemical incubator and an oscillator. It is widely used in the fields of biology, medicine, health, teaching and research, and is one of the commonly used instruments in laboratories.

2、 Product features:

1. Microcomputer temperature controller with simultaneous display of temperature, time, and speed, clear and intuitive, and easy to operate.

2. Forced air convection design ensures uniform temperature inside the box.

3. The insulation material of the box is made of polyurethane foam, effectively isolating the influence of external environmental temperature.

4. The large viewing angle observation window allows for a clear understanding of the working conditions inside the box.

5. Equipped with ventilation holes to ensure fresh air inside the box.

6. Mirror stainless steel inner liner, easy to clean.

IIIKXY-1210Full temperature shakerTechnical Specifications:

1. Temperature control range: ambient temperature -15 ℃ -60 ℃, low 4 ℃

2. Temperature control accuracy: ± 0.1 ℃

3. Temperature fluctuation: ± 0.5 ℃

4. Temperature control method: microcomputer PID control

5. Heating power: 600W, cooling power: 250W

6. Oscillation mode: Cyclotron

7. Oscillation amplitude: 26mm

8. Speed range: 20-300 rpm ± 1 rpm

9. Speed regulation method: microcomputer stepless speed regulation, with a speed deviation of ± 1 revolutions per minute

10. Timing range: 1 minute to 999.9 hours or normally open

11. Bottled volume: 1000ml × 12

12. Dimensions: 900 × 580 × 900mm

13. Power supply: 220V 50Hz

4、 Usage:

1. Install the flask containing the solution onto the fixture on the oscillation plate and close the box door.

2. Connect the power, turn on the power switch, and the temperature controller will light up.

3. Click the temperature button, then click △ or ▽ to set the working temperature. After setting, click the temperature button again to exit the setting state.

4. Click the speed button, then click △ or ▽ to set the desired oscillation speed. Once set, click the speed button again to exit the setting state.

5. Click the time button, then click △ or ▽ to set the working time. Once the setting is complete, click the time button again to exit the setting state.

6. Once set, press and hold the run button for 3 seconds to start the instrument running

7. After use, turn off the power and remove the flask.

5、 Precautions for use:

1. The instrument should be placed in a well ventilated and dry place,

2. Three hole sockets with grounding wires should be used,

3. Do not use in direct sunlight to avoid affecting the cooling effect.