800 type desktop low-speed centrifuge

800 type desktop low-speed centrifuge

1、 Product Introduction

800 type desktop low-speed centrifugeIt is a conventional laboratory centrifuge widely used in scientific research, education, and production departments such as biochemistry and medicine. The low-speed desktop centrifuge with a speed of 4000R/MIN is suitable for radioimmunoassay identification and separation of cells and large particles.

2、 Main technical indicators

Power AC: 220V ± 10 ℅ 50Hz ± 2 ℅ Motor power: 25W

Speed: 4000rpm Relative centrifugal force: 1790xg

Capacity: 20ml x 6

3、 Safety instructions before use

1Before using this product, please read all user manuals carefully.

2Before starting work, the machine should be evenly placed in an empty centrifuge tube and run at high speed1~2Only when there are no abnormal situations can it work.

3Do not touch the running rotor.

4It is strictly prohibited to turn the head and operate in an unbalanced loading state.

5Damaged wires or plugs or electrical equipment malfunctions should be repaired by professionals. Using electrical equipment accessories not recommended by the manufacturer can cause certain quality problems.

6Do not use in direct sunlight.

7. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine and have good grounding measures.

8Do not place this device near a heating element.

9It is strictly prohibited to move the machine while it is in operation.

10Strong impact is strictly prohibited on this machine.

11To replace the fuse, first unplug the plug from the socket.

12When operating, be sure to cover the centrifuge cover to prevent objects from entering and damaging the machine.

13Do not allow children to approach the machine in use.

14It is strictly prohibited to use metal cleaning materials for scrubbing. Soft cloth dipped in alkaline solution should be used for scrubbing.

4、 Instructions for use

1The worktable of the centrifuge should be flat and sturdy, the workspace should be neat, clean, dry, and well ventilated, and the ambient temperature should be5-32℃As appropriate

2Before starting up, the inner cavity and rotor should be wiped clean.

3Place the test tubes that have been weighed uniformly in advance into the centrifuge well.

4Close the centrifuge cover. Set a timer and turn on the power switch.

5Adjust the speed control knob to the desired speed.

6After completing the work, place the speed control knob in the smallest position, set the timer to "zero", turn off the power switch, and cut off the power.

7Wipe the inner cavity and rotor, and close the centrifuge cover.

5、 Precautions

1Do not place any objects on the centrifuge cover. After each use, do not clean or wipe the inner cavity and rotor. Cover the centrifuge cover to prevent dust and dirt from entering.

2If the centrifuge has not been used for a long time, the centrifuge cover should be opened for a period of time to dry the inner cavity before reuse.

3One instruction manual and six centrifuge tubes are included with the accessories package of this machine.