Desktop high-capacity low-temperature centrifuge

The 80-2 desktop high-capacity low-temperature centrifuge is a conventional laboratory centrifuge widely used in scientific research, education, and production sectors such as biochemistry and medicine. The low-speed desktop centrifuge with a speed of 4000R/MIN is suitable for radioimmunoassay identification and separation of cells and large particles, and is available in two types: timed and non timed.

　　80-2 desktopLarge capacity low-temperature centrifuge

The 80-2 desktop high-capacity low-temperature centrifuge is a conventional laboratory centrifuge widely used in scientific research, education, and production sectors such as biochemistry and medicine. The low-speed desktop centrifuge with a speed of 4000R/MIN is suitable for radioimmunoassay identification and separation of cells and large particles, and is available in two types: timed and non timed.

Power supply AC 220V ± 10 ℅ 50Hz ± 2 ℅

Speed 4000rpm

Timing range 0-60mln or normally open (mechanical timing)

Capacity 15ml × 12

1. Before using this product, please read all user manuals carefully.

2. Before starting work, the machine should be evenly placed in an empty centrifuge tube and run at speed for 1-2 minutes until no abnormal conditions are found before it can start working.

3. Do not touch the running rotor.

4. It is strictly prohibited to turn the head and operate in an unbalanced loading state.

5. Damaged wires or plugs or electrical equipment malfunctions should be repaired by professionals. Using electrical equipment accessories not recommended by the manufacturer can cause certain quality problems.

6. Do not use in direct sunlight.

7. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine and have good grounding measures.

8. Do not place this device near high-temperature heating elements.

9. It is strictly prohibited to move the machine while it is in operation.

10. Strong impact is strictly prohibited on this machine.

11. To replace the fuse, first unplug the plug from the socket.

12. When operating, be sure to cover the centrifuge cover to prevent objects from entering and damaging the machine.

13. Do not allow children to approach the machine in use.

14. It is strictly prohibited to use metal cleaning agents for scrubbing. Soft cloth dipped in alkaline solution should be used for scrubbing.

1. The worktable of the centrifuge should be flat and sturdy, the workspace should be neat, clean, dry, and well ventilated, and the ambient temperature should be between 5-32 ℃

2. Before starting up, the inner cavity and rotor should be wiped clean.

3. Place the test tubes that have been weighed uniformly in advance into the centrifuge well.

4. Close the centrifuge cover. Set a timer and turn on the power switch.

5. Adjust the speed control knob to the desired speed.

6. After completing the work, place the speed control knob in the small position, set the timer to "zero", turn off the power switch, and cut off the power.

7. Wipe the inner cavity and rotor, and close the centrifuge cover.

1. Do not place any objects on the centrifuge cover. After each use, do not clean or wipe the inner cavity and rotor. Cover the centrifuge cover to prevent dust and dirt from entering.

2. If the centrifuge has not been used for a long time, the centrifuge cover should be opened for a period of time to dry the inner cavity before reuse.

3. Comes with a manual for scraping the accessories, 12 centrifuge tubes, and one spare fuse.