Full membrane separation treatment equipment

Full membrane separation treatment equipmentadvantage

1. Full membrane separation control

Full membrane separation treatment equipmentAdopting the method of non compression, non air-cooled, non condensing, and pure membrane separation, the process is simple and the emission indicators are controllable. When the oil tank pressure increases to the set value, the main engine is started and the system starts running. Oil and gas enter the membrane separation component through natural tank pressure and are separated by vacuum negative pressure. After processing, the oil and gas are returned to the underground oil tank in the form of liquid or high concentration oil and gas. The separated clean air is released into the atmosphere through the exhaust valve.

2. Characteristics of membrane separation process

The full membrane separation process for tertiary oil and gas recovery equipment has the characteristics of simple process, low energy consumption, small volume, safe and controllable emission indicators, and high intelligence, greatly reducing maintenance and service life.

3. Product Introduction

RP3000-QM2 full membrane separation is suitable for use in oil stations with an annual sales volume of less than 3000 tons, with low electricity consumption. The upper limit of emission value is 10g/m3.

RP3000-QM5 full membrane separation is suitable for use in oil stations with an annual sales volume of less than 5000 tons, and has fast tank pressure control efficiency. The upper limit of emissions is less than 10g/m3.

RP3000-QM8 full membrane separation is suitable for use in oil stations with an annual sales volume of less than 8000 tons, and has fast tank pressure control efficiency. The upper limit of emissions is less than 10g/m3.

The new gas membrane separation technology is the third-generation gas membrane separation technology for volatile organic gases and air separation. Compared with the first generation gas permeation membrane technology, the second generation adsorption separation technology, and the current gas molecular screening separation technology, the new third-generation gas membrane separation technology has the following incomparable advantages:

1. Firstly, with the improvement of separation efficiency of the third-generation gas membrane separation technology compared to the previous two generations of gas membranes, the treatment of VOCs waste gas can be more efficient, with lower energy consumption, and long-term stable compliance of exhaust emissions after waste gas treatment. And its separation process is cleaner and more environmentally friendly, without generating secondary pollution, the equipment runs smoothly, and occupies a smaller area.

2. Secondly, the equipment has a long service life. Compared with adsorption oil and gas separation, membrane separation does not have adsorption saturation desorption processes or processes such as replacing adsorbents. Therefore, as long as it does not come into contact with substances that are highly damaging to the membrane, it generally will not malfunction. Under normal circumstances, the service life of the membrane is over 5 years.

3. Once again, its safety is high. Compared with the adsorption oil and gas separation closed system, the membrane separation system is an open system, and there are no hidden safety hazards caused by phase change heat of oil and gas during operation, nor are there any related dangers caused by sudden changes in system pressure.

4. Another issue is that membrane separation requires fewer auxiliary equipment and lower investment.

In short, membrane separation technology is a system that integrates recovery and emission standards, and is currently the world's most efficient, reasonable, and low-cost oil and gas recovery technology.