Product Categories

Dongguan Ruili Testing Equipment Co., Ltd

E-mail
ruili@dongguanruili.com
Phone
136-6299-5295
Address
No. 240 Wentang East Road, Dongcheng Street, Dongguan City, Guangdong Province

Explosion proof high and low temperature test chamber

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Explosion proof high and low temperature test chamber

Product Details

Introduction to High and Low Temperature Test Chamber

The high and low temperature test chamber is also known as the high and low temperature alternating test chamber, high and low temperature temperature test chamber, and high and low temperature environment test chamber. This equipment is used to simulate the operation of test products in a high and low temperature alternating humid and hot environment, in order to evaluate the working quality of the product. According to the set temperature point, the output of the heater is controlled by PID automatic calculation to achieve a dynamic balance. The performance indicators comply with the requirements of GB/T5170.2.5, GB5170.18, and GB/T2423 "Basic Parameter Calibration Methods for Environmental Testing Equipment of Electrical and Electronic Products".

Structural characteristics of high and low temperature test chamber

This high and low temperature test chamber adopts imported advanced temperature and humidity control instruments, with PID regulation, fast self-tuning, programmable control of cyclic testing, multiple parameter settings, digital display, and extremely convenient reading;

The refrigeration system adopts imported original compressors, which are efficient, stable and reliable;

The inner liner material is made of high-grade stainless steel sanding plate, and the outer shell is made of cold-rolled plate with electrostatic spraying, making the overall appearance beautiful and generous;

High temperature sealing strips are installed between the box door, the working room, and the outer shell to effectively ensure the sealing of the working room;

Parameter Description of High and Low Temperature Test Chamber

Model number	RL-D-40(A-G)	RL-D-80(A-G)	RL-D-150(A-G)	RL-D-225(A-G)	RL-D-408(A-G)	RL-D-608(A-G)	RL-D-800(A-G)	RL-D-1000(A-G)
Internal dimensions WxHxD (cm)	30x45x30	40x50x40	50x60x50	50x75x60	60x85x80	80x95x80	100x100x80	100x100x100
External dimensions WxHxD (cm)	80x132x84	90x137x95	100x147x105	100x162x115	110x172x130	150x187x130	150x187x130	150x187x150
temperature range	-70 ℃~150 ℃ (A: 25 ℃, B: 0 ℃, C: -20 ℃, D: -40 ℃, E: -50 ℃, F: -60 ℃, G: -70 ℃)
Temperature analysis accuracy/uniformity	0.01 ℃/soil 2.0 ℃;
Temperature and humidity control accuracy/fluctuation	± 1.0 ℃/± 0.5 ℃
Heating and cooling time	About 3.0 ℃/min; About 0.01 ℃/minute (a decrease of 2 ℃ -3 ℃ per minute or more is a special selection condition)
Internal and external materials	Cold rolled steel plate with baking paint treatment, inner box SUS 304 # made of stainless steel
Insulation material	High temperature resistant high-density polyurethane rigid foam insulator material
Cooling system	Air cooled single-stage compressor (-20 ℃), air-cooled two-stage compressor (-40 ℃ -70 ℃)
Protector	Non fuse switch, compressor overload protection switch, refrigerant high-pressure protection switch, ultra-high temperature production switch, fuse, fault warning system
accessory	Recorder (optional), viewing window, 50mm test hole, PL box light, partition
controller	TEMI "South Korea" TEMI
compressor	France's Tecumseh Brand
power supply	Φ 220VAC soil 10% 50/60HZ&3 Φ 380VAC soil 10% 50/60HZ

1. Box structure

1) The box is made of CNC equipment, with advanced technology, smooth lines, and beautiful appearance;

2) The inner box material is 1.2mm thick 304SUS high-grade stainless steel brushed plate, and the outer box material is 1.5mm thick high-quality cold-rolled steel plate electrostatically sprayed;

3) The insulation material between the inner and outer boxes is high-quality ultra-fine glass fiber insulation cotton, which has good insulation effect. The door frame connection between the inner and outer boxes is made of fiberglass connection frame, which has good connection effect. Even at -80 ℃, there is no sweating on the outside of the box;

4) Imported sealing materials and unique silicone sealing structure are used between the door and the door frame, with good sealing and aging resistance;

5) The air duct inside the box adopts a single circulation system, consisting of two long axis axial flow fans, two stainless steel multi wing centrifugal fans, and a circulating air duct. The temperature inside the upper and lower air outlets is uniform, which increases the air flow rate, heating and cooling capacity, and greatly improves the temperature uniformity of the test box;

6) Air medium heater, fast heating and long service life;

7) The air outlet is an adjustable louver type air outlet;

8) Anti condensation tape conductive film insulated glass window and high and low temperature resistant lighting device, installed in the middle of the box door, can clearly observe the internal test items.

2. Refrigeration system

1) Adopting a fully enclosed refrigeration compressor unit;

2) Refrigeration compressor: To ensure the cooling rate and minimum temperature requirements of the test chamber, a two-stage refrigeration system is adopted;

3) The design of refrigeration systems should incorporate energy regulation technology, which is an effective way to ensure that the energy consumption and cooling capacity of the refrigeration system can be effectively adjusted while the refrigeration unit is operating normally, reducing the operating costs and failure rates of the refrigeration system to a more economical state.

4) Refrigeration auxiliary components: air-cooled coil condenser, finned multi-stage evaporator, main refrigeration accessories and control components are all imported components.

5) Refrigerant: Environmentally friendly refrigerant 404A is used;

6) Cooling method: air cooling.

3. Measurement and Control System

1) The temperature controller used in this device has a temperature control accuracy of ± 0.1 ℃ (display range);

2) Equipped with PID self-tuning function, fuzzy control function, parameter shielding function, and user adjustment function;

3) The sensor is an A-grade Pt100 platinum resistance sensor with high accuracy and precision.

4. Electrical control system

1) The electrical control part adopts AC contactors and thermal relays, with reliable quality;

2) All other components are well-known domestic brands;

3) The electrical circuit design is innovative and easy to operate;

4) On the right side of the box is the electrical control cabinet, which is easy to inspect and maintain.

5. Attachment

1) Install a 50mm testing cable hole on the left side of the box for customers to conduct power on tests;

2) There is one movable sample rack inside the box, and the height can be adjusted freely.

6. Security protection system

1) Overtemperature alarm

2) Leakage protection

3) Insufficient phase protection

4) Overcurrent protection

5) Quick fuse

6) Compressor high and low pressure protection

7) Compressor overheat protection

8) Compressor overcurrent protection

9) Line fuses and fully sheathed terminals

10) Grounding protection

Technical execution standards for high and low temperature test chambers

This device meets the following requirements:

GB11158-2008 Technical Conditions for High Temperature Test Chamber

GB11158-2008 Technical Conditions for Low Temperature Test Chamber

GB10592-2008 Technical Conditions for High and Low Temperature Test Chambers (Temperature Alternating)

GB/T2423.1-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test A: Low temperature (IEC60068-2-1:2007)

GB/T2423.2-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test B: High temperature (IEC60068-2-1:2007)

GB/T2423.22-2008 Environmental testing for electrical and electronic products - Part 2: Test methods - Test N: No change in temperature (IEC60068-2-1:2007)

GJB150.3A-2009 Military Equipment Laboratory Environmental Test Methods Part 3: High Temperature Test

GJB150.4A-2009 Military Equipment Laboratory Environmental Test Methods Part 3: Low Temperature Test

After sales and maintenance services provided by manufacturers of high and low temperature test chambers

Pre sales: Professional technical consultation, providing the best equipment solutions (equipment selection, product testing plan, laboratory construction plan).

In sales: customer communication, progress updates; Equipment related guidance, installation, debugging, testing, etc; Coordinate calculations.

After sales: One year warranty, lifetime maintenance!

1. Technical training: operation and use, daily maintenance, common fault detection and troubleshooting

2. Regular follow-up visits: equipment inspection, troubleshooting, and dissemination of the latest news

3. Special reserve support for spare parts and components

4. The after-sales service department provides quick response for repair services

5. Full time maintenance personnel ensure timely and effective troubleshooting