Experimental Silicon Oxide Equipment

Experimental Silicon Oxide Equipment

Product application:

This equipment is a specialized device for the preparation of silicon oxide by vacuum evaporation. The reaction chamber is heated by molybdenum wire resistance, and the collection area is a metal cylinder structure. The effective evaporation area is not less than 15L.

Product Features:

The equipment furnace body is equipped with a vacuum pre extraction port and a low extraction speed extraction port, which is beneficial for preventing powder sintering from being easily extracted; The heating element is made of high-purity molybdenum wire and corundum components, placed in the reaction zone, and the heat radiates to the crucible to heat the product, ensuring the temperature uniformity and heating efficiency of the effective heating zone;

The crucible in the reaction area and the collection bin in the collection area both adopt portable and detachable structures for easy access and storage.

Core Structure and Characteristics:

Heating and insulation: Three sided heating with resistance wire, alumina polycrystalline fiber furnace, excellent insulation performance, fast heating and low energy consumption, weighing only about 1/5 of traditional furnaces.

Temperature control and intelligence: 30 segment program temperature control, PID self-tuning, temperature control accuracy ± 1 ℃; Support remote control, data recording, and report output, suitable for unmanned operation.

Safety and durability: over temperature alarm and power-off, leakage protection, furnace door and heating interlock, disconnection alarm; The spring door buckle compensates for high-temperature shrinkage gaps and ensures reliable sealing.

Selection and usage points:

Selection: Select the volume according to the sample size, the heating rate according to the process, the gas port configuration according to the atmosphere requirements, and the temperature control module according to the accuracy.

Usage: Shao needs to be dried in an oven to remove moisture; The heating rate should not be at full load for a long time to avoid damaging the furnace and components; Regularly check the status of resistance wires, thermocouples, and insulation layers.

Experimental Silicon Oxide EquipmentEquipment selection table: