Electrospinning nanofiber film production and manufacturing system

Electrospinning nanofiber film production and manufacturing system

Electrospinning nanofiber film production and manufacturing system

Both electro spray and electrostatic {essence} are electrokinetic mechanisms used to manufacture nano/particles and nano/microfibers. The basis of two processes is to apply electrostatic forces to generate charged jets from viscoelastic polymer solutions. Once the process is completed, the solvent will evaporate in a timely manner and obtain nano micron structures. The concentration of polymer solution determines the structure of the obtained material. Spherical particles were observed at lower solution concentrations. When the concentration approaches the critical value, it usually produces bead like morphology, that is, electrospun fibers with particles. Higher than the critical solution concentration can produce uniform fibers.

Inofilters can also be used for fine air filters and particulate air (HEPA) and ultra-low particulate air (ULPA) filters. These types of filters are *, providing over 99% efficiency; Thanks to the nanofiber structure, a certain degree of efficacy can be achieved. Nanofibers can physically capture unwanted particles by removing them from the airflow due to their fine fiber size and high surface area to volume ratio, allowing only clean air to pass through. Inovenso's R&D team conducted extensive research to develop an optimal formula for producing filtration membranes that can achieve high filtration while maintaining relatively low pressure drop.