- Phone
-
Address
Hongqiao Industrial Agglomeration Zone, Jiaozuo City
Product Categories
Jiaozuo Jinghong Disc Brake Co., Ltd
EMG thruster EB500-60
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The EMG thruster EB300-50 is suitable for safe braking of large lifting equipment, mainly installed in the hoisting mechanism and motor parts of coal mine belt conveyors and steel plant smelting equipment. The EMG thruster EB300-50 has the characteristics of compact structure and large braking force. Due to its outstanding advantages such as simple structure, few parts, and easy maintenance, the EMG thruster EB300-50 has been widely used in most industrial machinery.
Product Details
detailed description:
EMG thruster EB500-60Brake clearance refers to the gap between the brake pads and brake discs when the brake is in a released state, and its size has a significant impact on the braking performance such as safety and efficiency of the braking system. For example, an increase in brake clearance can lead to a decrease in braking force, resulting in poorer braking performance; Excessive brake clearance will increase the braking idle time and delay the safety braking time; A too small brake clearance can lead to increased friction between the brake pads and brake discs, resulting in wear. At the same time, friction generates heat, reduces the friction coefficient, and reduces the braking force by 0. Therefore,EMG thruster EB500-60The detection of brake clearance is of great significance for ensuring the stability of brake performance.
currentlyEMG thruster EB500-60The common method for detecting the gap between gates is to establish a detection system composed of sensors, signal acquisition modules, signal processing modules, computers, and related software. For example, using intelligent displacement sensors to measure displacement, then collecting and converting data through high-speed acquisition cards, and finally processing and displaying the data on a computer through Kingview software; A comparison was made between sensor contact and non-contact detection methods, with a focus on introducing the method of using a resistance based linear displacement sensor for detecting the gap between the lining plate top rod and the gate; Designed a gate gap detection method based on the C08051F310 microcontroller, using a small displacement potentiometer sensor to collect signals and displaying data on an LED digital tube; Liu Wei designed a detection system consisting of a linear displacement sensor fixed on the brake shoe base, an A37D universal terminal block, a PCI8622 high-speed data acquisition card, and a computer. The detection process of sensor data acquisition, signal preprocessing, and LabVIEW monitoring platform data display was analyzed.
Product Details:
Product Parameters:
Product performance:Variable lever ratio, installation is not divided into left and right, requires fewer spare parts, high space utilization, spring force center, brake arm is not subjected to torque, with automatic compensation for brake pad wear, high friction coefficient of high wear-resistant copper based brake pads, German EMG thruster.
Product materials:The product adopts integral casting without deformation, wear-resistant bearings, and stainless steel shaft components.
Product UsageThe USB3 series brakes are mainly used in container cranes, ship unloaders, steel plant casting cranes, water and electricity bridge cranes, ship lifts, cable cranes, and other equipment.
Product packaging:Wooden case packaging.
Instructions for Use:Brake installation dimensions and braking torque parameters: GB6333-86 standard, technical requirements comply with JB/T6406-2006 standard.
Usage conditions:
Environmental temperature: -20 ℃ -50 ℃;
There should be no flammable, explosive, or corrosive gases in the surrounding work environment, otherwise anti-corrosion products should be used;
The relative humidity of the air is not greater than 90%;
The altitude of the usage location complies with GB755-2000.
After-sales service
sales channel |
||||||||||||||||||||||||||||||||||||||||
|
Our company mainly sells to cities including Shanghai, Zhejiang, Jiangsu, Anhui, Inner Mongolia, Xinjiang, Chongqing, Yunnan, Shaanxi, Hebei, Henan, Hubei, Hunan, and Jiangsu West, Sichuan, Guangdong, Guangxi, Jilin, Heilongjiang, Liaoning, Ningxia, Gansu, Shaanxi, Shandong, Fujian, Hainan and other places. For many years, relying on excellent product quality and reputation We have established long-term cooperative relationships with multiple enterprises across the country. | ||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||