E+H guided wave radar measurement level gauge

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The E+H guided wave radar level gauge $r $n • Levelflex FMP50 is a basic liquid measuring instrument suitable for measurement applications with low temperature, pressure, or corrosion requirements. It can perform continuous level measurement without being affected by medium changes, temperature changes, gas coverage, or steam. This instrument has the characteristics of reliable measurement, fast debugging and diagnosis, multi echo tracking technology, and high safety. Application areas include liquid or solid level measurement in industries such as chemical, power, metallurgy, light industry, and water treatment.

Product Details

E+H guided wave radar measurement level gauge

The principle of measuring travel time with E+H guided wave radar is based on the Time Domain Reflectance (TDR) principle. Levelflex FMP50 is a basic liquid measuring instrument suitable for measurement applications with low temperature, pressure, or corrosion resistance requirements. The following are the specific parameters of Levelflex FMP50:

• Measurement principle: guided wave radar

Features/Applications: Basic pole type probe, cable type probe, built-in data storage unit, factory pre calibration, reliable measurement of changing media.

• Power/Communication: Two wire system (HART, PROFIBUS PA, FOUNDATION Fieldbus), four wire system (HART)

Measurement accuracy: Rod sensor:+/-2mm (0.08in); Cable sensor:+/-2mm (0.08in)

• Environmental temperature: -40...+80 ° C (-40...+176 ° F)

• Process temperature: -20...+80 ° C (-4...+176 ° F)

• Process pressure (absolute pressure)/maximum overpressure limit: vacuum 0.6 bar (vacuum) ..87psi）

• Main liquid receiving components: Rod sensors: 316L, PPS, Viton; Cable sensor: 316 PPS、Viton

• Process connection: Thread: G3/4, MNPT3/4; Flange: UNI flange

• Sensor length: Rod sensor: 4m (13ft); Cable sensor: 12m (40ft)

E+H guided wave radar measurement level gauge

Maximum measurement distance: Rod sensor: 4m (13ft), minimum dielectric constant DK>1.6; Cable sensor: 12m (40ft), minimum dielectric constant DK>1.6

• 通信： 4...20mA HART、PROFIBUS PA、FOUNDATION Fieldbus

Certificates and certifications: ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI, KC, EAC

• Safety certification: overflow protection WHG, SIL

Design certification: EN 10204-3.1

• Option: Split type sensor with 3m (9ft) cable

• Application restrictions: Horizontal tank: Use coaxial probe; Corrosive liquid: FMP52; High pressure/high temperature,>80 ° C/176 ° F, 6bar/87psi: FMP51, FMP54; Interface measurement: FMP51, FMP55