E+H Proline Promag electromagnetic flowmeter

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The E+H Proline Promag electromagnetic flowmeter $r $nPromag H is a sensor used for demanding applications in the chemical and life sciences industries. With true loop power technology, Promag H 200 can be seamlessly integrated into existing infrastructure in an economical and efficient manner. Based on intrinsic safety design (Ex ia), the highest operational safety can be ensured in hazardous areas. Heartbeat technology can always ensure process safety. The selection of measurement principle for $r $n is not limited by pressure, density, temperature, and viscosity. $r $n is an expert in measuring extremely small flow rates

Product Details

E+H Proline Promag electromagnetic flowmeter

The specific parameters of the E+H Proline Promag H 200 electromagnetic flowmeter are as follows:

• Nominal caliber range: DN2... 25 (1/12... 1 ')

• Material of liquid receiving components: PFA lining, electrode material 1.4435 (316L), Alloy C22, 2.4602 (UNS N06022) alloy, tantalum, platinum

• Measurement variables: volumetric flow rate, mass flow rate

Maximum measurement error: Volume flow rate is ± 0.5% O.R. ± 2mm/s (± 0.08in/s)

• Measurement range: 0.06dm ³... 300m ³/h (0.015... 80gal/min)

Maximum process pressure: PN40, Cl.150, 20K

• Medium temperature range: -20...+150 ° C (-4...+302 ° F)

• Environmental temperature range: -40...+60 ° C (-40...+140 ° F)

Sensor housing material: 1.4301 (304), corrosion-resistant

• Material of transmitter housing: with aluminum alloy AlSi10Mg coating

• Protection level: IP66/67, Type 4X

E+H Proline Promag electromagnetic flowmeter

• Display/Operation: Four line backlit display, touch key operation (external operation); Set up through on-site display screens and debugging software; Provide separate display units

• Output: 4... 20mA HART (passive), pulse/frequency/switch output (passive)

• Input: None

• Digital communication: HART, PROFIBUS PA, FOUNDATION Fieldbus

• Power supply: 18... 35VDC (4... 20mA HART, with or without pulse/frequency/switch output)

Explosion proof certification: ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC, TIIS

Product safety: CE certification, C-Tick certification

• Functional safety: Functional safety follows the IEC 61508 standard and is allowed to be used in safety applications specified in the IEC 61511 standard

• Metrological certification and certification: Perform calibration on the certification calibration device (compliant with ISO/IEC 17025 standard); Heartbeat Technology meets the traceability verification requirements of ISO 9001:2008 standard section 7.6a (T Ü V certification)

• Pressure certification and certification: CRN

• Material certificate: 3.1 Material certificate