Disperser radial flow agitator

fundamental type

Model and Name

Sketch Map

Operating parameters

YongtongCharacteristics of the mixer

DJ:DN

V(m/s)

μ(Pas)

Disc turbine type

YT610
Six flat blade disc turbine wheel

0.2~0.5

4~12

<30

Radial flow type is the strongest and most power consuming blade type in medium and high-speed agitators, with high shear force and strong dispersion ability.YTThe 610 agitator disc can form two circulating flows on top and bottom, and the gas is dispersed more smoothly and uniformly under this disc effect. Specially suitable for gas dispersion and absorption operations with high strength requirements.

YT620
Six blade inclined disc turbine type

0.2~0.5

2~8

<10

Axial flow pattern,YTThe shear force of the 620 mixer is second only toYT610 mixer. Under the condition of baffle, better upper and lower circulating flow can be obtained.YTThe 630 agitator blade has a large retreat angle, good discharge performance, and low power consumption, making it particularly suitable for mixing and dispersing non-uniform phases, as well as for heat transfer and emulsification operations.

YT630
Six blade inclined blade disc turbine type

YT640
Six blade curved disc turbine type

0.2~0.5

2~8

<10

Radial flow type, curved blade with a large retreat angle, large discharge capacity, low power consumption, and blade wear resistance.YT640 agitator is especially suitable for solid suspension when equipped with baffle.

YT650
Six blade disk turbine type

0.2~0.5

2~10

<10

YTThe 650 mixer has two circulating flows in different directions in the axial direction, and the blade surface is shaped like a parabolic surface. Large axial displacement, low power consumption, very suitable for solid suspension, as well as for mixing, gas absorption, and mass transfer operations.

YT660
Six blade disc turbine type

0.2~0.5

2~10

<10

Radial flow pattern, with concave blade surface and strong radial displacement and dispersion force, can enable sufficient emulsification and mass transfer of gas-liquid mixture. Its dispersion ability and mass transfer ability are comparedYTThe 610 mixer is 15% and 20% higher. It is particularly suitable for dissolved oxygen operations similar to fermentation processes, and can also be used for gas absorption, mixing, and dispersion mass transfer operations.

YT670
Six blade straight blade unidirectional disc turbine type

0.2~0.5

3~12

<2

Radial flow, a larger centrifugal radial streamline, is generally used in high-speed sections. When the mixer is running at high speed, it can make the central pressure head lower than the surrounding area, forcing the liquid to be ejected through the center of the mixer.YTThe 670 agitator blades are straight and have high shear force and dispersion ability.YTThe 680 agitator blade is curved and arc-shaped, with a large discharge capacity, low power consumption, and the blade is not easily worn. Two types of agitators are respectively suitable for gas recovery, dispersion, and mixed dissolution stirring operations with significant differences in two-phase liquid density.

YT680
Six blade curved unidirectional disc turbine type

Note: DJ - mixer diameter; DN - inner diameter of container; V - linear velocity of agitator blade end; μ - dynamic viscosity (1Pas=1000cp)