Demosiya fatigue testing machine

FT 3000Demosiya fatigue testing machineDesigned for use in rubber and material development, as well as other fields that require dynamic testing of rubber samples, it can operate continuously in applications such as quality control.

The main characteristics of the Demersia fatigue test are:

Single machine tensile and bending fatigue (De Mattia)

The stainless steel fixture can accommodate a total of 16 samples

Frequency, deflection distance, and dynamic travel can be freely set

You can set the total number of cycles and the number of cycles before automatic stop

Optional image recording with CCD camera and MonFT evaluation software

New fatigue testing and lifecycle simulation

FT 3000 is a direct linear drive fatigue tester;

Provide complete testing to demonstrate material properties, such as flexural crack/crack growth testing and tensile fatigue testing conducted in accordance with ISO 132, 6943, ASTM D 430-B, ASTM D 813, DIN 53522-1/2/3.

This instrument is designed for continuous operation in compound/material development laboratories and industrial applications, such as process quality control in rubber factories, which require repeated testing of rubber samples to evaluate dynamic material properties.

The optional arbitrary waveform programming and CCD camera data acquisition system make it easy to set up and adapt to the testing needs of each customer.

The sample preservation system is located in a hot chamber with precise control of the thermal environment. This 120 liter heating and cooling chamber allows temperatures ranging from -40 ° C to+180 ° C, covering almost all possible application environments. Due to the design of the three-stage closed-loop cooler and compressor, excellent temperature uniformity of+/-1 ° C can be achieved without the need for gas or external media during the cooling process.

High precision, rigidity, and durability

FT 3000 De Mercia fatigue testThe machine has direct drive with digital control and online position measurement functions, and the linear motor drive system ensures extremely precise motion, low levels of noise and vibration, high durability, and long lifespan. The instrument is equipped with a large stainless steel sample holder system without deflection. Optionally, an electric camera CCD system can be used to inspect the cracks and crack growth of the sample - the system also includes MonFT data

Collection software.

● Instrument options:

Camera CCD system (including MonFT software) (computer provided locally according to specifications)

For variable camera settings for through-hole or surface measurements, automatic crack propagation measurement and recording (De Mattia), automatic lateral camera movement, and integrated LED lighting system.

FT 3000 CH sensor fixture system with a single fixture (instead of a standard fixture)

Used to accurately measure the complete cycle of sample failure. Each position in the sample rack has a variable fixture for individually installing samples. Equipped with an integrated non-contact tension precision sample sensor, it can accurately detect the cycle of sample failure. The fault time (in cycles, minutes, or seconds) will be automatically transmitted to the software and stored.

● Control device:

The instrument is controlled by a front mounted 5.7-inch color touchscreen display. The display screen includes the following functions:

Input items

Enter the set number of cycles

Enter the set temperature (° C/° F)

Set the motor speed based on the number of strokes per minute

Read data

Number of completed cycles

Current chamber temperature

Actual speed/position of the motor

Loop to the next pause

Cycle since the last pause

The human-machine interface can be used to configure testing and display status alerts. It can also be used at any time to start, stop, or pause testing

● Technical indicators:

• International standards

ISO 132、6943，ASTM D 430-B，D 813； DIN 53522 -1/2/3

• Speed regulation

Direct linear drive from 0.05 to 5Hz

• Schedule adjustment

Between 0 and 60 millimeters

• Large grip distance

160 millimeters

Max traction force

600N (at 1Hz oscillation frequency)

• Sample rack

16 samples can be tested simultaneously.

• Hot chamber temperature

From -40 ° C to 180 ° C, with an accuracy of+/-1 ° C

• Instrument dimensions (width x depth x height)

1200x900x1880 millimeters