Common voice, sound, and light alarms

Common voice, sound, and light alarmsXDT-M-3

Product Description:

The product core adopts integrated circuit design, which has the characteristics of strong capability and stable operation; The appearance is made of spray painted steel plate material and advanced technology, with a novel, beautiful, and generous structural design; Flashlight utilizes the currently popularLEDMade from fluorescent tubes, greatly enhancing their service life; At the same time, this series of products also has the advantages of light weight, waterproof, strong earthquake resistance, and easy installation. Suitable for noisy industrial sites or relatively open mining areas. Suitable for safety alarm devices in lifting machinery, gantry cranes, bridge cranes, cranes, as well as large metallurgical and mining industries. Users can choose voltage, tone, and voice alarm according to their own usage scenarios and requirements.

Common voice, sound, and light alarmsXDT-M-3

Product features：

1.Sound and light alarms for large lifting machinery and other walking equipment.

2.Adopting imported technology for independent designLEDChangliang/Shining light,Signal light and speaker combined sound and light combination product

3.Cold rolled steel plate, sprayed shell/sturdy and durable

4.The product is equipped with a tone selection switch and a volume adjuster inside, allowing users to adjust the tone and volume according to their needs

5.Aluminum lamp holders can be equipped with stainless steel metal protective nets according to user needs

6.Suitable for various overhead cranes,driving,Cranes and conveying equipment,port dock,Ship machinery, steel industry sites, petrochemical industry,Outdoor complete equipment, etc

7.Lampshade color:red-Ryellow-Ygreen-Gblue-Bwhite-W

8.Number of flashes: 60~80/mim

9.volume: Max.120DB

10.material:lampshade-PC,body-steel plate,Speaker shell:(The square hornPCplastic,The round horn-SUS316L),rearview mirror-heat resistanceABS

11..This product can be equipped with a protective net according to customer needs, but this type of product does not include a protective net

12.The installation of waterproof joints for the product in the picture and the installation of filling boxes for ships can be customized

13.remote control,light control,Infrared control,Power outage sound and light alarm,Equipped with battery sound and light alarm,Special requirements such as voice prompts can be customized according to user requirements

Construction and wiring:

The controller is connected to the detector using a three core shielded wire (note: the single core wire diameter is not less than 0.75mm of the national standard wire, depending on the actual distance), and the shielding layer is connected to the controller casing and reliably grounded. When using RVV cables, metal pipes should be threaded and reliably grounded.

Refer to the wiring diagram of the controller and detector, and connect the corresponding terminals of the controller and detector of the sound and light alarm.

Wiring method:

1. Connect the input controller terminal to the corresponding detector terminal;

2. Connection between output terminals and linkage devices;

When the inductive equipment such as exhaust fans meets the condition of less than or equal to 5 A/220V, they can be directly connected to the output terminal, but try to avoid connecting the load equipment directly to the output terminal as much as possible. When the load equipment is greater than 5 A/220V, an external adapter device must be connected;

5. Controllers and detectors must ensure reliable grounding;

When performing various installation operations, it is necessary to turn off the power first, otherwise it may burn out the host

Some products of Hangrong Company:

0-30VDC normally open proximity switch LJKE-BS18-DJ-CN8XC1321
SN6F300K2 proximity switch

Small cylindrical proximity switch SR05-1DN

BHWDHLX-08 24-380V belt conveyor rope switch
BK E3JK-DS30M1 infrared induction switch diffuse reflection type AC/DC universal relay output
CR-D10ECH U: 10-36V I: 2000mA for proximity switch steel plant

Proximity switch SAT8-1BXSJ-R15220VAC for steel mills

SAT8-1BXSJ-G415220VAC proximity switch for steel plant conveyor belts
BKF-DS200M1 Waterproof Photoelectric Sensor
EH50-D80C-L1 long detection distance proximity switch