Burkert turbine flowmeter rotor component 00432304 brass version

Burkert turbine flowmeter rotor component 00432304 brass versionFLOW S030 BRASS FKM sealing ring

German Burkert flowmeter DN20 base repair turbine parts SET8 brass FKM seal PVDF white turbine 00432304

The Burkert turbine flowmeter 8030.8032.8035 uses a turbine rotor to measure liquid flow rate. Due to unstable installation position and flow rate, the Burkert turbine rotor components are prone to damage, including ceramic shaft fracture and PVDF impeller washing away.

The Burkert turbine flowmeter joint base S030 sensor joint has an internal impeller for measuring flow, specifically designed for measuring neutral, slightly corrosive, and solid free liquids. The compact sensor connector (S030 type) must be used in conjunction with the B ü rkert transmitter (SE30 type, SE30 Ex type, SE32 type, SE35 type, SE36 type, or 8611 type), and the two can be easily and quickly connected together through a bayonet lock. B ü rkert's "in pipe quarter turn" technology is a design that ensures leak free operation.BürkertThe rotation of the impeller (the yong magnet in the blade) is detected non-contact by transmitting signals through the sensor joint wall through the sensitive element of the transmitter. When installing or disassembling the transmitter, there is no need to open the pipeline or interrupt the ongoing process.

S030 type B ü rkert turbine flowmeter connectorfeature

DN 06…DN 65

We offer a variety of different materials and process interfaces for you to choose the appropriate specifications based on specific applications and process conditions

Closed pipeline system, where sensors are part of the joint

Quarter turn technology (B ü rkert bayonet lock)

The transmitter can be used for display, monitoring, signal transmission, 2-point control, or quantitative control

Burkert turbine flowmeter rotor components00432304 brass delivery drawing:

Burkert flowmeter rotor component 00551763 stainless steel arrival diagram:

There are also Burkert flowmeter turbine rotor components such as 551764432305.

The turbine rotor component model corresponding to Burkert turbine flowmeter base 005610130055416900553022 is 00551763. It is used for disinfection and is generally used by pharmaceutical companies and users.

Burkert flowmeter base 00562495 is the complete model of S030 base (corresponding to rotor accessory SET8 model 551764)

Suggestions on selecting Burkert flowmeter types for purified water or injection water equipment!

Burkert turbine flowmeterIt is strictly prohibited to pass bubbles, especially on the impeller. There should be no bubbles or start stop vibrations. (Actually, as long as there are bubbles in the pipeline, anything used will not be accurate.)

At the front end of the equipment pipeline, if bubbles are generated, it is recommended to use a Burkert electromagnetic flowmeter (except for the medium deionized water, which is not recommended, everything else is fine). The electromagnetic flowmeter will at least be inaccurate. This turbine is extremely expensive, in short, it requires too many turbine accessories, either the impeller is damaged or the turbine shaft is broken!!!

The main reason why the turbine shaft of the SET8 rotor accessory on the S030 base of the Burkert turbine flowmeter is prone to breakage is:

If the Burkert flowmeter turbine shaft keeps breaking, it's really not the shaft's fault. Normally, it wouldn't break so quickly. It must be a problem with the user's pipeline!!!

Mainly, there are impurities and small bubbles in the medium, and another possibility is that the back end of the pipeline starts and stops too quickly, which can cause water hammer due to the large reverse impact and lead to the fracture of the turbine shaft.

Burkert turbine flowmeter rotor component 00432304Technical Specifications: